IPv6 static route not working
My org has an SRX1400 running 12.1x48-D30. My ISP has started offering IPv6 and has given us a static address for the gateway, a subnet for our internal devices, and the other info needed to connect.I...
View ArticlePICO Cell setup on SRX? Anyone has exprienced with it?
Hi All, Based on the url below, may i know whether it possible to simulate it just using the DHCP is configured in SRX itself.? Another thing what attribute need to configure on Radius server....
View ArticleIs it SRX5k support icap feature?
Hi all, First of all may some one explain what exactly the icap and is it this feature have in SRX5k series? Thanks and appreciate any feedback
View Articlecan't ping to interface FXP0
HiI have one of SRX cluster and assign two IP addresses for interface FXP0 on node 0 and interface FXP0 on node 1 which is 192.168.111.1 and 192.168.111.2. I designed a dedicated switch as gateway of...
View Articlesystem services rest not supported?
Hi guys, Anyone has enabled an SRX300 for rest API? I have done the config but I am not able to make it work. The doc says that only MX, T, M, PTX platforms support the rest config but it sounds bit...
View ArticleClik here to view.
SRX NAT Configuration in 2 IP and 2 Ports
Hi, newbie here!. im having a little bit trouble when im trying to configuring NAT in Juniper SRX. i have 1 ip public and 1 ip private (the description about the ip is in picture that im attach in)....
View ArticleSSH to FXP0
I can't ssh to FXP0 interface. Here is my configurationset groups node0 interfaces fxp0 unit 0 family inet address 10.0.0.1/24set groups node0 system services sshset groups node1 system host-name...
View Articleunable to ssh from outside
I am unable to ssh from outside but internally i can login to srx210 device ge-0/0/0 untrustge-0/0/1 trust ------------------------- Security Zones...
View Articlefxp0 and reth in the same subnet
Hello,I have a SRX3400 cluster with fxp0 in 172.16.0.0/16 for OOB management. The firewall has 3 zones, public reth0, DC reth1 and Corporate reth2.I want to create a 4th zone for the OOB management...
View ArticleSRX220h2 error log message
HiModel: srx220h2JUNOS Software Release [12.1X44-D30.4] We got these kind of error message .Anybody let me know what's wrong and how can I stop it ? Apr 24 09:35:30 MRAC-RTR-FIG PERF_MON:...
View Articlenameserver configuration with Routing-Instance.
I have a question. I have a plan to connect the SRX to the DNS server toward Internet. Let just say that the DNS is 8.8.8.8. SRX that i have configured is already have an RI that provide for internet...
View ArticleMigrating SRX100H2 to SRX300
I have a really old SRX100H2 firewall. I would like to migrate to SRX300.Is the migration as easy as exporting and importing the config? Some migration tips would help greatly. Thank you very much.
View ArticleClik here to view.
Adding a separate VPN device through SRX
HI Everyone, I'm relatively new to Junos but have had plenty of experience with ScreenOS. However I'm trying to solve a problem and i'm not sure if it's even possible in the current state or if i need...
View ArticleNeed assitance with mPIM upgrade for VDSL2 vectoring.
Good evening everyone. A number of months back, I purchased a second hand SRX210 with a VSDL2-A mPIM. Now NBN Co. (Australian National Broadband Network) are due to roll out in the next 6-12 months...
View ArticleClik here to view.
Problem Dynamic VPN. Correctly connected, Correctly policy and NAT but, NO...
Hi,last week I configured one dynamic VPN profile for VPN client access.It was working perfectly, but after one weekend of changes, I came back to re-connect in VPN from remote location and I found...
View Articlesrx 300 2 vlans from ISP
Hi, I`m new in juniper world. I have srx 300 have to connect with my ISP. They give me 2 vlans: one tagged vlan (vlan tag 555) for TV, which I have to bridge with some lan port, and one untagged for...
View ArticleSRX VPN tunnel go down and wont recover till I manual remove the secondary IP...
hi all,I have SRX24H2 cluster on one side with 2 DPD external IP configured (the other side have 2x srx220 regular configurationion )Hostname: SRX-REDModel: srx240h2JUNOS Software Release...
View ArticleManagement Access to SRX cluster flapping between primary and secondary
Hello Experts, I have noticed the the management SSH access is flapping between primary and secondary node every minutes. {primary:node0} root@FW-01> Write failed: Broken pipe [user@sys ~]$ ssh...
View ArticlePort Unreachable on the SRX chassis cluster
Hi all,There is a warning from our snmp monitoring tool. From its log: The warning is Port Unreachable: SRX-Chassis-01 [ reth0.0 ] reth0.0 (X.Y.Z.W) ------> X.Y.Z.W is an IP address...
View ArticleNeed help with SRX240
Bought a used SRX240 so unknown history. Can connect to configure port and everything seems fine. Reset to factory settings and it is running Junos 12.1X44-D35.5 I cannot connect to JWEB I connected...
View Article