Good evening everyone.
A number of months back, I purchased a second hand SRX210 with a VSDL2-A mPIM. Now NBN Co. (Australian National Broadband Network) are due to roll out in the next 6-12 months are they provide vectoring with the VDSL2 and I'd like to be as ready as possible before my ADSL2+ connection disappears and we move over to VDSL2.
I have been trying to locate the correct file(s) to enable me to upgrade the VDSL2-A mPIM's Firmware from 2.10 to 2.16 which is what I am lead to believe, is required for vectoring on VDSL2.
I have included some system details below.
Now, I have searched high and low to try and locate to correct file but I come up empty handed. Some posts suggest that the Firmware updates should be included with the SRX210's software update file, but I'm not finding that to be true. I also keep finding differences in the naming of the files with some being 'jfirmware-srxsme.....' and the other, 'junos-srxsme....'
I suspect that I NEED the 'jfirmware' files but for the life of me, I cannot locate them on the Juniper website with correct or same revision number that I require. The only file I seem to be able to locate and download, are the junos-srxsme... files. Am I missing something??
Any help in locating the file(s) required to allow my to upgrade the Firmware of the VDSL2-A mPIM would be very muchly appreciated.
Thank you in advance.
Cheers, Colin.
root@XXXXXXXX> show version
Hostname: XXXXXXXX
Model: srx210he2
JUNOS Software Release [12.3X48-D50.6]
root@XXXXXXXX> show system firmware
Part Type Tag Current Available Status
version version
FPC 1
PIC 0 VDSLBCM 10 2.10.0 OK
Routing Engine 0 RE BIOS 0 2.8 2.8 OK
Routing Engine 0 RE BIOS Backup 1 2.8 2.8 OK
root@XXXXXXXX> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis XXXXXXXXXXXX SRX210HE2
Routing Engine REV 06 750-048672 ACLG3448 RE-SRX210HE2
FPC 0 FPC
PIC 0 2x GE, 6x FE, 1x 3G
FPC 1 REV 19 750-025184 ACLN4438 FPC
PIC 0 1x VDSL2 Annex A
Power Supply 0