LAB SRX 540 To MX-140 IPSEC Tunnel
1.1.1.1--------MX---------xe-2/0/0----------------------------------------------XE-2/0/0--SRX-----2.2.2.2 10.0.1.1/30...
View ArticleLAB SRX 540 To MX-140 IPSEC Tunnel
1.1.1.1--------MX---------xe-2/0/0----------------------------------------------XE-2/0/0--SRX-----2.2.2.2 10.0.1.1/30...
View ArticleDynamic VPN landing page on public IP.
HiOur SRX320 is showing the following landing page on our public IP "The SRX no longer provides hosting of the Pulse Client for direct download.Please obtain the Pulse Client from the Pulse Website"...
View ArticleHigh CPU on a SRX 100B
Hi everyone! I have a very special problem on a SRX100B. Around the same time every day the CPU spikes and when I check the services I can see that eventd and rtlogd is around 30% each. This goes on...
View Articlehow to block https://www.123.com/abc
I want to block https://www.123.com/abc in SRXhow to achieve thispls give me a deatiled setup steps.thanks in advance
View ArticleSRX320 VPN authentication with Yubikey?
I'd like to start using a Yubikey for authentication for VPN sessions. What is considered to be the most straightforward way to do that with the SRX series? Thanks.
View ArticleSRX110H2-VA VDSL PIC Firmware
Hi Karan, I am trying to update my VDSL PIC Firmware. Can you please provide a link to the firmware file: jfirmware-srxsme-12.3X48-D65.1.tgz My system version and firmware are as follows:...
View Article1 Way LDP between SRX210/Cisco 2901
Working on a MPLS SP lab. It appears I am unable to establish 2 way ldp session between my SRX and Cisco 2811. My SRX shows an ldp neighbor, but my 2811 does not. Output below. Not sure if my egress...
View ArticleIKEv2 Traffic Slector in 17.X
Good day, We are currently running multiple vSRX's (15.1X49D120) in Azure with IKEv2 VPNS's and Traffic Selectors. We are starting a change to upgrade these to 17.X, but I can't find out which version...
View Articlebgp vpn between SRX or ospf vpn
We have site-site to vpn between Site A & Site B , (Site A SRX 210 , Site B SSG5 ) till now everything is perfect but now we added new SRX210 at Site B with another ISP. So now SRX210 at Site A...
View Articlehelp with transparent mode
trying to set srx300 into global-mode transparent bridge i am following the artical https://kb.juniper.net/KB31147 and the unit will not go into the required mode how is this done i am typing set...
View ArticleMobile Signal Level into Cacti
Hi,Is there any way to graph mobile signal level into cacti from LTE Mini PIM card. Can you please advice MIB/OID used for this purpose or any other workaround. Thanks,
View ArticleSSH Issue on SRX1500
Hi all, I still have an issue on one SRX that simply will not accept SSH connectivity. It is configured exactly the same as the other SRX does allow SSH connectivity. As this equipment is going into...
View ArticleBFD issues
Good Evening We are running a OSPF backbone with around 35 routers and 100 routes. The routing table is not that large compared to other systems we have running. If i log into a router that is running...
View ArticleSRX DHCP from routing-instance and "no gate found"
Anyone knows what this means in packet trace log related to DHCP packets? Haven't seen before.. Apr 18 21:58:21 21:58:20.881836:CID-0:RT:search gate for untrust:0.0.0.0/68->255.255.255.255/67,17Apr...
View ArticleClik here to view.
SRX110 VDSL Configuration pp0.0 down inet
Hi, I'm new to configuring Juniper products, I know my way around Cisco products reasonably well, certainly not a pro but not a beginner. I've brought an SRX110H-VA to get into Juniper and I'm...
View ArticleProxy ARP doesnt work
Hi. Perhaps someone was faced with a similar problem. I'm trying to set up dest nat with proxy arp but in doesnt work. Some parts of config:#reth1.0:family inet { } address a.b.c.66/28;} #show...
View ArticleSRX100 and Unifi AP - 2 subnets on 1 interface required
Hello everybodyI have following setupmodem --> SRX100--> Netgear GS716Tv3 switch--> (rest of th network including Hyper-V infrustructure, DC/DHCP, and Unifi WAP) On SRX100 I have folllowing...
View ArticleClik here to view.
SRX Cluster - IP Monitoring doesn't work
Hello all,i have problems to implemtent IP monitoring on my juniper chassis cluster.At first, i' ll explain my environment and my configurations (see picture below). The link from node 0 will be...
View ArticleSRX Static NAT not working
Hi, Following static NAT is not working, any suggestions?root@213-ROUTER> show configuration | display set | match S1 set security nat static rule-set S1 from interface ge-0/0/5.0set security nat...
View Article