Unable to find option to configure ADSL2+ on SRX110-va
Trying to configure PPPoA configure BT ADSL+. But I cannot find the option of "encapsulation atm-pvc". Any reason why ? root@xxx# set interfaces pt-1/0/0 encapsulation ?Possible...
View ArticleSRX300 Port Lights not working
Hello,Is it possible somewhere in configuration to "turn off" port link and activity led lights on stand alone SRX300 (19.2R1.8)?I have a strange situation that none of my port led lights aren't...
View ArticlePPPoE communication is not possible with PPPoE Server & Client of SRX
I am verifying SRX's PPPoE Server & Client with reference to the following video, but I cannot communicate with...
View ArticleSRX 3600 and failed SPC
Hello, I'm completely new to this forum and Juniper newbie, so please bear with me.We have cluster of two SRX3600 with the following setup:1 x NPC card2 x SPC cards (Cp-Flow + Flow)1 x SRX3k 2x10GE XFP...
View ArticleJuniper srx / migrate ipsec vpn certificates
Hi all,i need to migrate a config from a srx 1400, to a srx 1500, however i don´t know how can i export and re-import the certificates used by IPSEC-VPN. How can i do this?
View ArticleClik here to view.
Access WEB SERVER behind SRX300 from from INTERNET
How to access WEB Server (192.168.20.2) in Server zone from Internet.my Public IP is x.x.x.xWhat i need to configure in SRX?my diagram:appreciate!
View ArticleVoIP and SIP ALG behavior in routed rfc 1918 networks without NAT
Hello everybody,on a corp lan/man with several thousands of users and several hundreds of firewall modules spread across ranging from SOHO boxes to highend SRX we're in the middle of a large scale VoIP...
View ArticleUnable to get traffic shaping working on a SRX345
I'm convinced I've missed something but I can't for the life of me work out where I am going wrong. I would like to shape traffic on a single physical interface (acting as a switch port) to 2Mbps. I...
View ArticleProtecting old Linux hosts against TCP Sack Panic with SRX, hoe?
I have a Linux Servers network that sits beihnd a SRX device.Some of them cannot be upgraded and are vulnerable to TCP Sack Panic CVE.I cannot upgrade these Servers at the time and on more then one...
View Article1-Port T1/E1 Mini-Physical (SRX-MP-1T1E1-R) Interface Module supports...
AFAIK, the said card should support Channelized E1s however it is not mentioned clearly in the documentations. Can any confirm the said support?
View ArticleSRX 300 policer Bandwidth issues
We have a SRX where x2 ports are configured with seprarate IP networks. Both ports are capped to 100 mbps but when running a speedtest on separate ports we get full BW however runing a speedtest on...
View ArticleGRE Keepalive
Hi I try to monitor GRE status. The output are below Logical interface gr-0/0/0.0 (Index 76) (SNMP ifIndex 535)Flags: Hardware-Down Up Point-To-Point SNMP-Traps 0x0 IP-Header...
View ArticleVoIP, for Comcast Xfinity, filtering?
I have internet service from Xfinity/Comcast. The VoIP service is only hardware compatible with an approved voice modem. This means that the phone plugs are on the modem. I bought a voice modem but it...
View ArticleSRX340 Virtual Chassis & BGP
Hi all, We're about to migrate our datacenter equipment from Ubiquiti to Juniper and I'm preparing the migration and configuration.A little bit of context:- Two SRX340's- Two fiber uplinks to our...
View ArticleManually change to secondary
Hello, We have two old srx240 firewalls and one of them failed with the primary partition getting corrupted and the secondary partition with old software. We rebuilt the firewall with the same version...
View ArticleCGNAT configuration on SRX?
Hi all, I'm try to search CGNAT configuration on SRX but it just pointing on MX. So anyone can give me some example or url how CGNAT configure on SRX? Thanks and appreciate any help
View ArticleSwitching Questionnaire for Pre-Sales to ask customers
Hi, I was wondering if Juniper has a Questionaire table or something alike that we can send to our customers once they have a switching requirement. A lot of them just send that they need a switch that...
View ArticleUser identities from Cisco ISE to Juniper SRX
Hello, I wrote a small Python program that receives syslog messages from ISE, extracts information about users and sends them to SRX firewall via web API. If you want to test it, you can download it...
View ArticleSRX5800 in cluster mode with UTM
Good Day, require some clarity. According to Juniper online information active/active with UTM do not support EWF. So what does this exactly mean. Currently i have a SRX5800 cluster running in...
View ArticleIPSec failed to work in SRX110 with Cisco
I have to setup IPSec with the following information with a remote router cisco , Given information from Cisco managed router support team,IKE Phase 1 ProposalIKE Version IKE V1Encryption Algorithm...
View Article