Hi all,
Is there anyone facing the error as per below when do commit in SRX5800 chassis cluster using LSYS. I'm already have open case with L3 Support but until now engineering team cannot duplicate the error on their lab.
test@SRX5800# commit and-quit
node0:
configuration check succeeds
node1:
warning: ignoring noise in patch:
application [ TCP-4118 TCP-4120 TCP-4122 ];
/tmp/juniper-47863.patch:5
0) syntax error
warning: Load error seen when propagating changes into LR database
commit complete
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 192.168.30.0/24'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 192.168.40.0/24'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address Global-222'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address Global-221'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 172.10.10.0/24'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 172.10.11.0/24'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 172.10.12.0/24'
warning: statement does not exist
[edit logical-systems LSYS-01 security policies from-zone vFW3 to-zone Server policy 13 match]
'source-address 172.10.13.74'
warning: statement does not exist
error: statement not found: destination-address
warning: ignoring noise in patch:
application [ TCP-4118 TCP-4120 TCP-4122 ];
warning: Load error seen when propagating changes into LR database
node0:
commit complete