Hi all,
Is there any command that make the cluster on node 1 back to normal after i delete the monitoring interface? Below is the log. Previously interface xe-23/2/4 was in reth2 but now i'm delete entire configuration reth2 and physical interface with chassis cluster monitoring then commit. But now cluster break due to monitoring. Any one know the command without reboot the node 1. Thanks and appreciate someone help.
{primary:node0}
test@srx5800> show chassis cluster status
Monitor Failure codes:
CS Cold Sync monitoring FL Fabric Connection monitoring
GR GRES monitoring HW Hardware monitoring
IF Interface monitoring IP IP monitoring
LB Loopback monitoring MB Mbuf monitoring
NH Nexthop monitoring NP NPC monitoring
SP SPU monitoring SM Schedule monitoring
CF Config Sync monitoring
Cluster ID: 1
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 1
node0 129 primary no no None
node1 128 secondary no no None
Redundancy group: 1 , Failover count: 29
node0 129 primary no no None
node1 0 secondary no no IF
{primary:node0}
test@srx5800> show chassis cluster information | no-more
node0:
--------------------------------------------------------------------------
Redundancy Group Information:
Redundancy Group 0 , Current State: primary, Weight: 255
Time From To Reason
Apr 4 11:19:48 hold secondary Hold timer expired
Apr 4 11:20:23 secondary primary Better priority (1/1)
Redundancy Group 1 , Current State: primary, Weight: 255
Time From To Reason
Feb 14 02:37:25 primary secondary-hold Monitor failed: IF
Feb 14 02:37:26 secondary-hold secondary Ready to become secondary
Feb 14 02:41:11 secondary primary Remote yield (129/0)
Jun 1 02:25:48 primary secondary-hold Monitor failed: IF
Jun 1 02:25:49 secondary-hold secondary Ready to become secondary
Jun 1 03:02:05 secondary primary Remote is in secondary hold
Chassis cluster LED information:
Current LED color: Green
Last LED change reason: No failures
node1:
--------------------------------------------------------------------------
Redundancy Group Information:
Redundancy Group 0 , Current State: secondary, Weight: 255
Time From To Reason
Apr 4 11:20:27 hold secondary Hold timer expired
Redundancy Group 1 , Current State: secondary, Weight: 0
Time From To Reason
Feb 14 02:37:25 secondary primary Remote is in secondary hold
Feb 14 02:41:12 primary secondary-hold Monitor failed: IF
Feb 14 02:41:13 secondary-hold secondary Ready to become secondary
Jun 1 02:25:47 secondary primary Remote yield (128/0)
Jun 1 03:02:05 primary secondary-hold Monitor failed: IF
Jun 1 03:02:06 secondary-hold secondary Ready to become secondary
Chassis cluster LED information:
Current LED color: Amber
Last LED change reason: Monitored objects are down
Failure Information:
Interface Monitoring Failure Information:
Redundancy Group 1, Monitoring status: Failed
Interface Status
xe-23/2/4 Down
{primary:node0}
test@srx5800> show configuration chassis cluster
control-link-recovery;
reth-count 2;
control-ports {
fpc 1 port 0;
fpc 13 port 0;
}
network-management {
cluster-master;
}
redundancy-group 0 {
node 0 priority 129;
node 1 priority 128;
}
redundancy-group 1 {
node 0 priority 129;
node 1 priority 128;
interface-monitor {
ge-10/1/1 weight 255;
ge-22/1/1 weight 255;
ge-11/1/1 weight 255;
ge-23/1/1 weight 255;
}
}