Port Forwarding Using J-Web?
There is plently of documentation regarding this subject using the CLI, however, I have been unable to locate any on Port Forwarding Using Only the J-Web interface. Could someone point me in the right...
View ArticleSRX100 and BT ADSL UK - intermittent Internet connectivity
I am in the process of configuring SRX100 for one of my clients and I am experiencing intermittent Internet connectivity issue. Here is my setup so far: BT ADSL line:BT Home Hub 3 – Hub is configured...
View ArticleSRX240H High Dataplane CPU Load (99%) low throughput
Hi all, since a few days i´m searching for the reason why the throughput of an SRX240H Cluster is so slow.additional i debugged and reviewed the whole configuration if there are any problems visible....
View ArticleConfiguring Serial Interface on Quad T1/E1 GPIM on SRX550
Hi Guys, I need help to convert the following cisco config to Juniper using the Quad T1/E1 GPIM on SRX550. ---- controller E1 1/0 framing NO-CRC4 channel-group 1 timeslots 1-16 channel-group 2...
View ArticleSSL Proxy Not Giving Server certification validation error
Hi, I just configured the SSL proxy and applied to the right security policy.I have followed this link to configure SSL proxy...
View Articlecryptographic algorithm SSH Juniper SRX3400
Hello, my customer have question for SSH in Juniper SRX3400. "Guidance for cryptographic algorithm and key lengths when performing remote management of network devices s, (e.g., transition to 2048-bit...
View ArticleVPN IPSec client for JUNOS 12.1X47-D30.4
Hi there, Does anybody know the working Juniper/PULSE IPSec VPN client (Win/OSX) version ?Which exact build works? THA Rr
View ArticleSRX policy applications
Hi, probably dumb question but here goes, in a security policy when we match application "any" does that mean all the predefined applications that are included in the SRX? Thanks.
View ArticleClik here to view.
ospf issues with metrics between areas
Good Afternoon I am seeing an issue where traffic is flowing between R4 and R5 even with it having a metric of 1000. Both of these networks are only bridge so that if R2 fails we still have a backup...
View ArticleOrder of global and zone specific policy?
Hello Expert What is the order of global security policy and zone specific policy? Means first all zone based policies are evaluated and then all global policies will be evaluated?
View ArticleJUNIPER please re-design J-Web, please
Anyone here seen the Juniper J-Web GUI for managing Juniper devices?It is so pre web 2.0 ish and is nothing close the the current web standard of designing new web management GUI for networking...
View ArticleClik here to view.
Dynamic Site to Site VPN - only 1 static IP
Hi,My first post on these forums We have two SRX 100s, we would like a site to site VPN established... ....Here's the catch.... One SRX can have a static address, the other must work dynamically....
View Articlehow to read Total Capacity hardisk on srx3400
hai, i have one question, i want to khow capacity total from hardisk on srx3400, i used command "show system storage". but i can read total capacity from hardisk....
View ArticleJUNOS Default Application junos-ms-rpc-epm
? Hello I was converting ScreenOS config to SRX. I found one application/service MS-RPC-EPM in screen OS, having ports - tcp and udp ports 135. This service/application was not converted by SRX...
View ArticleRemove address-book from group address
Hi I am new in SRX and want to know how to remove address-book from group-address.Let's say, i have "SERVER" group and there is two entry. I want to remove 10.10.150.60 from this "SERVER" group...
View ArticleCPU spikes on data plane caused by security monitoring
2x SRX220H HA cluster As seen in messages:Feb 24 16:43:04 SRX220H-HA.miovision.corp PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 3 PIC 0 CPU utilization exceeds threshold, current value=92Feb 24...
View ArticleControl Ports Recommendation for SRX5400
Hello Experts I have two SPC in SRX5400 in slot 0 and slot1. What is the recommendation for control port - HA? it should be from slot 0 or slot1?
View ArticleJust gre tunnel
Hi,I have SRX 240 with JUNOS 12.1X46-D40.2 on board.I need to create gre tunnel with cisco isr 1841.GRE interface: gr-0/0/0 { unit 0 { tunnel { source 11.12.13.14; destination 21.22.23.24; } family...
View ArticleClik here to view.
two next hops on Default Route
Rank amateur Alert! After changing our ISP and getting a new Public IP I added a new default route via the J-Web. However it looks like it retained the old default route so now i have two hops against...
View ArticleSRX/F5 Position Global Data Center
We are looking for an SRX/F5 Network Engineer for an onsite position in Alpharetta GA. Must be either US Citizen or Perm Resident. Contact kmiller(at)corus360.com
View Article