srx 210 when update on VPN wizard always get fail and can't update.
Ii'm fresh in setup on juniper. i need setup site to site VPN between srx 110 and srx 210, i try setup site to site vpn wizard on srx 110 no get any error, but i setup on srx 210 alway get error...
View Articleencrypting the srx configuration file
Hi all, there's an option to encrypt your config file on the srx: http://www.juniper.net/documentation/en_US/junos12.1x44/topics/task/configuration/security-configuration-file-encrypting.html It works...
View ArticleSRX3600 IPsec VPN (Base-route): Multiple Phase-1 SAs for Same Gateway
Hi All Now ,in this Case, throuht command "run show security ike security-associations ",find Multiple Phase-1 SAs for Same Gateway， but IPsec sa only one . 3004773263 UP 691ac4504cbe66b1...
View Article[partition] option in [request system software add] command
In 15.1X49 @SRX300 series, Is not support [partition option] in the command that is [request system add software]? I tested two versions of 15.1X49 that the one is D35 and the other one is D45.My SRXs...
View ArticleJuniper SRX3600
Hi, I wolud like to reproduce Juniper SSG-520M config on Juniper SRX3600.I really need your help to do this.I can send you the SSG-520M config file.RegardsMahaman Sani
View ArticleSNMP Configuration issue on SRX
Hi All, While configuring SNMP community string "XYZ"(with IP 192.168.1.30/32)everything goes ok but when i enter commit it returns me following error. 'interfaces ge-0/0/4.0' Interface ge-0/0/4.0...
View Article3G/4G USB modems and SRX future?
Hello.we are using hundred of SRX boxes for many years, and waiting for any normal solution for WAN backup link.not EOL CX box, with very limited modems support list.time is going and still no...
View ArticleVoIP configuration for SRX240 cluster
Hello, I have a client with an SRX cluster, connected to 100x100 internet. They have about 20 phones that connect to Vonage Business, about the same number of PC's, some VPN's, etc.. We are having...
View ArticleNAT inbound not connecting through SRX for some services and allowing other
I have an SRX220H2 that is allowing some connections inbound such as 3389 but not 9081,908210001,10002. I have confirmed I can access the devices on the ports detailed and can ping from the SRX to...
View ArticleAddress Book or Services search
Hi guys, good day... Did anyone explore what version on Junos where we can easily search for address object entries or services instead of scrolling down ...lets say i have hundreds of addresses...
View ArticleSRX345 which has turned into a brick
Anyone ever encountered an SRX345 with a red alarm LED, a "Major" alarm showing fxp0 as down and seemingly no way to reviving it? I've done a load factory-defaults, a zeroise, I've installed Junos...
View ArticleHow to do IKE site-to-site properly?
Hi all, I'm trying to set up a VPN tunnel between the SRX220 and a remote server. The server runs Ubuntu and StrongSwan providing IKEv2 VPN service (with server certificate and EAP username/password...
View Articleload balancing on fab members
Dears , I have SRX5800 cluster with two xe members on the fab , traffic flow only on one xe and the other is not used : Logical interface fab1.0 (Index 71) (SNMP ifIndex 543) (Generation 168)Link:...
View ArticleAllow SRX TFTP backups over a WAN
Hi All, Running a SRX240 version 12.1x46-d35.1 What I would like to be able to do is backup up the SRX to a remote TFTP server over the WAN. Everything works fine with the local site SRX but the remote...
View ArticleLLDP not supported on SRX 340
Does any one have any idea is LLDP is going to be supported on SRX340's any time soon currently running version 15.1X49-D40.6 does not seem to support it.
View ArticleClik here to view.
vSRX 15.1 on ESXi 6 Strange Console Issue
Dear members; i have deployed a Juniper vSRX 15.1 (which runs as a virtuilized instance under Wind River Linux) as per standard documents:...
View ArticleWhat is wrong with the configuration pppoe connection?
I tried to configure a connection to the Internet according to the instructions from here.but i don't have access to internet. help pleaseconfiguration interfaces { fe-0/0/0 { description "To...
View Articleospf is not activating in srx550
Dear All , OSPF is not activating in srx550 firewall .I have configured ospf and enabled all interfaces in ospf area but still ospf is not coming up and when i am doing "show ospf neighvor" it is not...
View ArticleIKE between SRX and StrongSwan keeps timing out
Hi all, I'm trying to set up a site-to-site VPN tunnel from a Juniper SRX220 to a server running StrongSwan using IKEv1 with PSK. The problem is that even if the "ike" service is allowed in the host...
View ArticleSNMP Interface Queries Failing Intermittently
Hello, I recently encountered an issue with snmp queries intermittently failing when polling the reth interfaces of an SRX210 cluster. We're using firmware version: [11.4R1.6] It's worked for years...
View Article