Can you cluster SRX 240H2 and SRX 240H ?
Hi all, is there any problem with the below setup? run show chassis hardware detailnode0:--------------------------------------------------------------------------Hardware inventory:Item Version Part...
View Article300 series license
Can anyone tell me what the JSB / JSE licenses are for on the SRX300 series? Does the device have the same functionality as previous SRX models without any licenses e.g. NAT, VPN, etc.? I can not seem...
View ArticleIPSEC site-to-site --> Traffic not go through tunnel every 7 days?
Hi All, Currently my SRX has IPSEC point-to-point to Fortinet. But the issue is every 7 days traffic will not go through the IPSEC tunnel even the tunnel is not down. Usually i'm need to clear back the...
View ArticleI'm not set command on SRX220H
Hello, I'm no views full commande and set ? Why ? i'm viewing simply root@gw-1> set ? Possible completions: chassis Set chassis properties cli Set CLI properties date Set system date and time I'm no...
View ArticleSRX300 series VLAN interface
I have been configuring an SRX320 for the first time.[edit vlans]root@lab-01# run show version Hostname: lab-01Model: srx320Junos: 15.1X49-D45JUNOS Software Release [15.1X49-D45] I noticed that under a...
View Articlesecure-wire for aggregated interface member links documented design is not...
Hello collegues,I'm testing secure-wire on srx in junos 12.3x48 using...
View ArticleAfter a successful commit changes don't take effect
Hi, I was making some simple changes to an existing configuration, like adding a new NAT rule or security policy.I performed a commit which was successful.When I perform a show command (like show...
View ArticleStatic route depending on vpn state?
I have an SRX240 running Junos 12.3 with a number of ipsec vpns. We plan to put some dynamic routing in place. But for now we are using statics. Can a static route be configured such that it only...
View ArticleHow to use USB memory on Junos CLI on SRX @15.1X49.
Please teach me how to use USB memory on Junos CLI on SRX @15.1X49.Somebody knows?I could not find in manual for 15.1X49.Regards,Kenji Nagoshi...
View Articlekernel: watchdog: Time since last watchdog
Hi all, I want to see the message kernel: watchdog: Time since last watchdogis no longersent to the syslogserver I have already tried the KB...
View ArticleDHCP option 43/125 for Mitel
Has anyone successully configured option 43 or 125 for Mitel phones? Does this have to be in a byte stream? The details are:TFTP: 10.10.10.20RTC: 10.10.10.20Mitel IP phone: MITEL IP PHONEMitel...
View ArticleLogging NAT
Hi Guys, I would like to push NAT logs to my syslog server, I set logs type to any, but unfortunetly I can't see anything about NAT on my syslog server. syslog { archive size 100k files 3; user * { any...
View ArticlePort Mirror configuration on SRX5800?
Hi all, When i look into this url http://kb.juniper.net/InfoCenter/index?page=content&id=KB21842&actp=search i'm confius on step 7. It said need reboot. Another question do we need to assign...
View Articlestorage cleanup
J-Web is unable to access user information as the device file system is full. Please clear the storage from CLI using (request system storage cleanup) to continue with J-web access. request system...
View ArticleDestination nat port forward issue
Hi all, For the SRX 240, I want to set destination nat port forward for below: 172.16.1.3:125 --> 192.168.1.108:125172.16.1.45:1433 --> 192.168.1.108:1433 The two different internal ip and...
View ArticleSRX3600 SNMP monitor timeout
Hi all, Monitoring system configured to monitor with SNMP CPU load, temperature, interface traffic ...For SRX3600 SNMP status is Cannot connect to "X.X.X.X:161": Timeout. I think this is access issue....
View Articlelogging traffic - log server
Hi Guys, How I can send all information about traffic to my syslog server? I would like to display traffic stats in my company from the firewall but my analytics software needs to get all information...
View ArticleDynamic VPN Security Policies
Hi, I have configured Dynamic VPN as per:http://www.juniper.net/documentation/en_US/junos12.3x48/topics/example/vpn-security-dynamic-example-configuring.html In the documentation it states the the...
View Articlesource NAT allocation failure for a 0/0 source-nat interface
Hi Team, I have 4 backend servers listening on port 137. I have source-nat interface configured for accessing these. set security nat source rule-set rule-set1 rule rule1 match source-address...
View Articlesource NAT allocation failure for a 0/0 source-nat interface
Hi Team, I have 4 backend servers listening on port 137. I have source-nat interface configured for accessing these. set security nat source rule-set rule-set1 rule rule1 match source-address...
View Article