What is flowd_vsrx in show system processes extensive output?
Hi everyone,I am curious about Flowd-vSRX process as shown belowThere is no documents I was able to find about this on google. root> show system processes extensivelast pid: 1357; load averages:...
View ArticleEnabling BFD on Qualified Next Hops in Static Routes for Route Selection on...
HiIm tryed to enabling BFD on Qualified Next Hops in Static Routes for Route Selection on a SRX1500 cluster in packet mode in a virtual router instance. Should this work ? or do I overlook some thing....
View ArticleSRX240H2 - flow_process_pkt rc 0x7 (fp rc -10000)
Hi. I've question - is the following packed dropped? I don't know how to interprt this entry:flow_process_pkt rc 0x7 (fp rc -10000) I am connecting FROM 172.19.31.44/4998 TO 10.77.131.71/443. The...
View ArticleSRX - OSPFv3 ipsec authentication under logical system
Hello, We try to setup OSPFv3 authentication over IPSEC under a lsys user and a specific vr.On one side , we use a SRX1500 (junos 18.2R3S2) and on another side, we use two Cisco ASR1000 (IOS XE3.16)....
View ArticleEnable captive portal using Web-Redirect-to-HTTPS for Unauthenticated and...
Been reviewing and searching some resources as well on how to enable the captive portal for non-domain users and unathenticatd users using web-redirect-to-https. I'm using vSRX 19.4 for my testing. My...
View ArticleSRX OS upgrade managed by Security Director
Hi, Currently, SRX is managed by Security Director (just for NAT and Policy) and if I upgrade with latest OS, does it require to import again in the security director? Any other consideration that I...
View ArticleSRX ipsec with Fritzbox
Good day, i try to esteblish a tunnel with a Juniper SRX 210 on one side and a AVM Fritzbox on the other side.I found http://ebsa.nl/Home/Site_to_Site_VPN_Juniper_SRX_to_Fritz%21Box and it looks like...
View ArticleMultiple Address Pools for dyn-vpn?
Hi,We've recently added a second range to our VPN set up (couldn't expand the range because of overlap) and whilst most things are working I have an issue with users hitting our proxy, I think I've...
View ArticleClik here to view.
SSL Proxy on CSO cloud service
Hello community: I am trying to enable the SSL proxy on an SRX deployed in CSO but it does't work, any recommendation? I show you the steps I did: I generated the root CA on OpenSSL using the commands...
View ArticleRE: Use case for running SPC2 and SPC3 card together in SRX 5800 cluster
Hello, Is there any issues with running mixed SPC2 and SPC3 cards simultaneously on the SRX 5800 cluster? My customer is currenlty running four SPC2 cards on each member of the HA and their plan is to...
View ArticleConfigure default route when Untrust interface is a DHCP client
My SRX is a DHCP client for the Untrust interface, and gets the default (0.0.0.0/0) from our ISP, which shows up in inet.0. I have a VPN setup to our corporate office, and I would like all outgoing...
View ArticleDynamic VPN with NCP Secure Entry Client
Hi to all,i have a problem to establish a VPN connection with SRX300 with an NCP Secure Client. I looked to other posts but could not find anything which helped me in my case.I have used this...
View ArticleClik here to view.
ZONE to VLAN routing instances not working
Good morning! I am currently working on a SRX1500, and I am trying to bridge the gap in communication from one interface to another on my device. ge-0/0/2 has been assigned to a zone called LR23 and i...
View ArticleConfigure Integrated User Firewall
Hi All, Hoping someone can provide an answer to an issue I have connecting an LDAP session to the DC. When the connection attempts, it immediately disconnects with an authentication failure. The DC...
View ArticleSRX HA Active Active
Hello, I am following this documentation to configure active/active SRX:...
View ArticleSRX300 to Adtran Trunk Issue
I am trying to setup a trunk from a SRX 300 to Adtran switch after a device failure. The Adtran switch is performing layer 3 for the network. When I enable trunk mode between the devices I am unable...
View ArticleIPSEC over TCP
I have A IPsec vpn that is running between 2 SRX’s, One SRX is connected to A 4G router and behind CG-NAT.The link is to provide a backup management access. The VPN is up but SSH connection access the...
View ArticleIPsec tunnel time
Hello, I have multiple srx320s establishing a route based IPsec tunnel with an srx1500. The problem is the phase 1 tunnels take too long to establish. 20 -25 minutes until the 320s respond to Ikev2...
View ArticleRouting to public IP via ipsec tunnel
Hi, I´m starting with junipers and I would have a questionwe have SRX in our branch with a public IP 130.193.xx.xxx.I have created IPSEC tunnel with our partner who has a public IP 185.14.xx.xxxNo...
View ArticleSkyatp Blacklist
Hello, We have a SRX connected with Skyatp.And my question regarding the Blacklist downloaded from Skyatp.Does the firewill block the connection to a https server (if the IP is mentioned in the...
View Article