I am trying to setup a trunk from a SRX 300 to Adtran switch after a device failure. The Adtran switch is performing layer 3 for the network. When I enable trunk mode between the devices I am unable to ping between the devices. (srx 192.168.1.1 - adtran 192.168.1.2). My configuration is attached.
Note: I have tried with and without native-vlan-id 1
ge-0/0/5 {
native-vlan-id 1;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members [ home security school yard sound ];
}
}
}
Config:
}
services {
ssh;
netconf {
ssh;
}
dhcp-local-server {
group jdhcp-group {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
}
}
}
time-zone UTC;
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
}
}
}
}
zones {
functional-zone management {
interfaces {
ge-0/0/4.0 {
host-inbound-traffic {
system-services {
https;
ping;
ssh;
}
}
}
}
}
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 10.10.1.1/24;
}
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/4 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/5 {
native-vlan-id 1;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members [ home security school yard sound ];
}
}
}
}
ge-0/0/6 {
unit 0;
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
update-server;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
}
access {
address-assignment {
pool junosDHCPPool {
family inet {
network 192.168.1.0/24;
range junosDHCPPool_range {
low 192.168.1.2;
high 192.168.1.254;
}
dhcp-attributes {
router {
192.168.1.1;
}
propagate-settings ge-0/0/0.0;
}
}
}
}
}
vlans {
home {
vlan-id 7;
}
default {
vlan-id 1;
}
school {
vlan-id 2;
}
security {
vlan-id 4;
}
Yard {
vlan-id 5;
}
sound {
vlan-id 6;
}
vlan-trust {
vlan-id 192;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 10.10.10.1;
}
}