0x1000:reboot due to panic
Hi guys, i have a SRX340 that almost daily, and sometimes more than once daily rebootes. When i run "run show chassis routing-engine" i get the following output:0x1000:reboot due to panic Routing...
View ArticleJuniper SRX ISP failover
Newbie to SRX. My requirement is very simple. Already has one ISP (working fine). ISP1Now new ISP has come. ISP2Need to add new ISP to SRX Configure ISP failoverWhen ISP1 goes down, ISP2 take up &...
View ArticleClik here to view.
Can`t console the SRX1500
Hi all ,I`m facing a really strange issuei want to console an SRX router that i bought recently but i got no prompt on putty or tera term.the strange things are :i accessed the router before and tested...
View ArticleSSL Exemption - Intermittent Issues
Hoping someone else may have some information on this -We use SSL Proxy Profiles for our SRX340/345s - and we see an intermittent issue where a URL pattern that we have exempted in SSL profiles will...
View Articleclear security flow statistics
Hi all,For instance when you do the folllowing, it is shown when interface statistics was cleared or Never cleared..show interfaces ge-0/0/0 extensive | match clearStatistics last cleared: Never How...
View ArticleApplication Firewall licensing
Hello,We are currently testing the the Application Firewall functionality with a temporary license. So far our tests are coming up with positive results and we are most likely going to purchase a...
View Articlebooting previous Junos OS version after upgrade
Hi all,After upgrading Junos version on 650srx, the new version was working fine...But after while box was needed to reboot. We did. After reboot, we realised previous junos version had been loaded and...
View ArticleClik here to view.
SRX SIP Phone issues
Hello All,We have SIP phones(mostly yealink) and they are all in separate zone. It was very hard to make them working, we had to disable SIP, SCCP, Talk on SRX300, otherwise phones didn't register or...
View ArticleResizing doen't stop
hi people,Why fregmentation is still occurred even assigning 1300 mss value to encrypted vpn traffic....?
View ArticleClik here to view.
BGP sessions over IPSec fail when SA recreated
This is my first post to the forum, so excuse me if I am not following all conventions. I have a deployment scenario in which I have an IPSec tunnel between my SRX device and a Barracuda F180. I am...
View ArticleLogin Class/Privileges
Hello,I have created a login class named Network-Operation on SRX and i allow following commands of Operation/Config mode.set system login class Network-Operation permissions interfaceset system login...
View Articlemss is for UDP in IPsecVPN
hi there,We know that ipsec traffic has additional overheads such as |ESP Header|Ext IP Header| etc....So in order to adjust tcp mss to avoid truncation, it is command to use with the following cli:...
View ArticleSlowness over Ipsec vpn tunnel
Hello,We are facing an issue with with the tunnels one our Juniper SRX 240. We have a tunnel between Gibraltar and Israel and between London and Israel and whenever we try to copy a file from/to Israel...
View ArticleAnyone got a problem with this? Address books
I have setup my address books as such...security { address-book { MyNetwork { address MyNetwork { range-address 192.168.1.2 { to { 192.168.1.254; } } } address IPV6-2001 2001:558:5516:37::0/56; address...
View Articlebest practice firewall filter or security zone/policy (pfsense firewall rules...
Hello, I am planning to migrate pfsense firewall rules to SRX340, but i would like to know what is the most best practice solution to do this. Do i need to use security zone with additional policies or...
View ArticleDUP in icmp
Hi all, There is a kb -https://kb.juniper.net/InfoCenter/index?page=content&id=KB31657&cat=EX4550&actp=LISTBut when trying to ping other devices running junos, th same things are happening....
View ArticleHow can I set the same console connection timeout on SRX as Cisco?
How can I set the same console connection timeout on SRX as Cisco?ex.Router(config)#line console 0 Router(config-line)#exec-timeout 10
View ArticleAny one know the IDP signature can protect attack APT10?
Hi all, Any one can point me whether the current signature IDP database can protect attack as per url below? https://www.securityweek.com/new-apt10-activity-detected-southeast-asia Thanks and...
View ArticleWhy there is no feature log-prefix
Hi all,There is the following KB on "log-prefix" for control plane logging.https://kb.juniper.net/InfoCenter/index?page=content&id=KB12679 Can I ask why there is no "log-prefix" feature/option on...
View Articlesyslog severity info and any any
Hi there,Some syslog configuration has "severity info" option on the #set sec log stream STRM_1 severity infosome has any any.What is difference between them and what is the best aproach?
View Article