Hi all,
There is a kb -https://kb.juniper.net/InfoCenter/index?page=content&id=KB31657&cat=EX4550&actp=LIST
But when trying to ping other devices running junos, th same things are happening. I read the KB, it says that "have a separate Routed VLAN interface (RVI) configuration for the second subnet." But I couldn;t understant enough...
Anyone explain why this DUP! occurs? And what solution must be?
srx650-01> ping ex4500switch02 no-resolve
PING kvtrnax002.kmtltd.net.au (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=61 time=6.170 ms
64 bytes from 10.10.10.1: icmp_seq=0 ttl=61 time=8.459 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=0 ttl=61 time=10.395 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=0 ttl=61 time=12.512 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=1 ttl=61 time=3.654 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=61 time=3.803 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=2 ttl=61 time=3.771 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=61 time=3.979 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=3 ttl=61 time=4.870 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=61 time=5.449 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=3 ttl=61 time=6.008 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=3 ttl=61 time=6.563 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=4 ttl=61 time=3.786 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=61 time=3.936 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=5 ttl=61 time=3.938 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=61 time=4.091 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=5 ttl=61 time=4.805 ms (DUP!)
64 bytes from 10.10.10.1: icmp_seq=5 ttl=61 time=4.925 ms (DUP!)
Thanks
A.