Maximum user on SRX Firewall
Hi Does SRX firewall limit number of users? As my understanding, SRX dosen't limit number of user on firewall but limit number of remote user for dynamic VPN feature. Am I correct?
View ArticleMaximum number user on SRX Firewall
Hi Does SRX firewall limit number of users? As my understanding, SRX dosen't limit number of user on firewall but limit number of remote user for dynamic VPN feature. Am I correct?
View ArticleClik here to view.
source nat pool and proxy-arp not working
I've found all of the docs and troubleshooting guides and think everything is configured properly. I've gone through the guide...
View ArticleSRX320 LTE Configuration
Dear Team ;I have SRX320 with LTE Card .i have inserted two sim cards from two different ISP .Two Sim cards are for Private VPN (to reach HQ). Is it possible to establish one gre tunnel on each SIM...
View ArticleChassis Cluster 4100 4200
Dear JuniperCan i use DAC cable 10GB for Chassis cluster (Control and fabric)?
View ArticleClik here to view.
Issue trying to make some zones communicate with Internet
Hello all, I am currently trying to have two of my zones communicate with the Internet (untrust zone) without success. I have other zones that work fine. Machines can also communicate from one zone to...
View ArticleDynamic VPN secondary DNS issue
Hi all, We're having an issue with our dynamic VPN secondary DNS allocation to clients. The configuration is as follows : family inet { network 192.168.10.0/24; range range-XXX{ low...
View ArticleSRX345 VPN issues with Cisco SA520W
Good day, We have recently replaced a FortiGate firewall with a new Juniper SRX345. Networking-wise everything is working fine, however we are getting issues with e VPN connection to a Cisco SA520W....
View Articlesrx 4100 and srx 4200 license
can some provide how this works for these boxes? been search everywhare and canot find this is the base included? what features does the enhacned add?
View ArticleAccess to local dataplane logs in stream mode
I know that using stream mode means that dataplane (security) logs are sent to the syslog servers instead of logging locally. However, I noticed a steram mode "cache" setting (security/log section)...
View ArticleSRX 4100 with EX-SFP-1GE-T
Dear JuniperSRX 4100 with GBIC EX-SFP-1FE-T, Does It support device that connects with 10Mbps and 100Mbps?
View ArticleClik here to view.
[SRX320/210] JDHCPCD lease timeout issue with DHCPv6 Client PD w\ PPPoE on...
Hi, When connecting to my ISP I receive a /56 IPv6 prefix for PD. Updates for RAs are sent to two irbs. Each irbreceives a /64 which hosts use for their purpose. Issue is that the DHCPv6 client under...
View ArticleJ-Web removes backslash character on source identity object when committing...
We have SRX 320 with latest firmware version.root@orn-gw-01> show version Hostname: orn-gw-01 Model: srx320 Junos: 15.1X49-D150.2 JUNOS Software Release [15.1X49-D150.2] The SRX J-Web management...
View ArticleSRX 240 Tunnel with MX 104 Unable to establish IPSEC
Good evening, I am trying to connect sto.1 in SRX-240 with MX-104. The SRX-240 currently have a sto.o in production connected to a cisco router. We are replacing the cisco router with the MX-104....
View ArticleSRX240 having high CPU utilization issue: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC...
Hi, I am facing the the CPU high utilzation issue of SRX240.Log messages are :Oct 18 11:14:55 SRX-CORP-WILL-A last message repeated 2 timesOct 18 11:15:15 SRX-CORP-WILL-A PERF_MON:...
View ArticleDHCP not working [Juniper SRX300]
Hello, Everything is OK but my DHCP is not working.If I put fixed IPs into machines they work normally, if I let DHCP on so the computers get APIPA addresses. I am not a Juniper Expert so If somoene...
View ArticleWhich model and license should I select for SRX firewall?
Hi I'm confused with SRX license. I would need a firewall for branches in first year without any subscription and next year we have a plane to move all email service to Office365 and deploy I'm...
View ArticleClear pim join and effects on Transit multicast stream
Please consider the following example: Listener-------f1 SRX---f2---------------Rest of Multicast Network--SRC 1.1.1.1235.1.1.1DENSE MODE CASE:Suppose SRC is generating packet every 2 msec for group...
View Articlejuniper vsrx (ssl -vpn ) configuration works ??
juniper vsrx ssl vpn configuration works ??
View ArticleClik here to view.
Internet failover with dual-ISP configuration and routing-instances by using...
We have a SRX320 with two ISPs connected to the ge-0/0/0 and ge-0/0/2 interfaces and trusted subnets connected to the ge-0/0/5 interface. We use both ISPs for destination NATs to forward ports from...
View Article