DHCP over VLANS issue
Hello,I'll briefly explain the situation - i have DC servers which proviodes DHCP adresses to all VLANS, SRX works as gateway ( also as DHCP server for guest network which doesn't have any issues -...
View ArticleClik here to view.
Any misconfigured for DNS policy? symetric or asymetric.
I have a question regarding to the permiting policy for DNS application. The case just passed but just wonder the root caused by. I already open a simple policy for DNS using junos-dns-tcp and...
View ArticleSRX110 - FTP Server with User anonymous
Hi Community, I'm trying to use a SRX110 as an FTP server for the ZTP. DHCP is running and FTP service is started. But I can not use the user anonymous. I tried to log in to the SRX from an EX3300 via...
View ArticleSRX345 alarm LEDS - clearing
Seems like a trivial problem but if the led stays red it becomes useless.This is a new install of an srx345. During install I created an internet disconnection alarm. This caused 2 alarm entrys - one...
View ArticleBad Next Hop question
" RT: bad next-hop ge-0/0/1.0 -- next-hop ge-0/0/1.0 is not point-to-point" ge-0/0/1.0 has a dynamically asssigned IP address, so I cannot enter a static IP. How do I define the default route/gateway...
View ArticleSip client issue SRX 220h2
Hello guys. I'm very new to the Juniper world and have an issue that I just can't resolve. I have a static NAT set up for my pbx using public SIP trunks. The NAT is public-pbx any, any port. SIP ALG is...
View ArticleISIS on SRX Not Learning IPv6 routes
I have a simple SRX cluster connected via MCLAG to two MXes. All devices have ISIS configured for learning IPv4/6 routes. SRX is able to learn and advertise IPv4 routes but not...
View ArticleSRX and Active directory intergration
Hi,I'm trying to get our new SRX 320 to intergrate with our windows AD so that when our staff try to access the internet the SRX will allow/deny access to specific sites etc. I have found a few...
View ArticleSRX300 HA pair is not up due to Config Sync
All I want to do is enable simple HA cluster between two SRX 300. Their ge-0/0, 0/1, 0/2 are direct connected with ethernet. After enabling cluster id 1 it shows below: root@r0> show chassis cluster...
View ArticleRoute Based VPN - Traffic Outage for every IKE lifetime - Multiple Responder...
Good Afternoon, I've been having some issues with a route based VPN we have between our SRX clsuter and a customer Checkpoint Generally, the VPN is working fine. We have 2 subnets on our side hitting...
View ArticleSRX340 interface issue
Hi all, I am testing some Juniper devices for possible use as NTE for the Ethernet Core. I configured and tested the SRX300 and that works fine. I am now configuring an SRX340 and have hit a...
View ArticleClik here to view.
SRX300 & 340 Series IPv6 Question
Hi, Another question regarding the SRX300 Series.If I have 1 interface that is routed to the CPE (SRX as NTE) and the other interface configured for ethernet-switching (VLAN to the core) and it works...
View ArticleSRX240 not responding to SNMP Poll
I have a SRX 240 Cluster that cannot be polled via SNMP but it responds to SSH i have SNMP allowed under Interface and its vlans and also under routing instance. I checked the traffic logs and from...
View ArticleSRX Interface Bridge WAN to DMZ
I am looking to configure a Interface bridge on an SRX by bridging the WAN interface in the untrust zone to another physical interface in a DMZ zone. We are currently performing this on a SonicWall...
View ArticleSRX - web filtering license required or not?
Apologies if this has been asked for - I tried to look but couldn't find the same There's some info on the below mentioned thread but I still couldn't find my...
View ArticleSRX 550 wont get IP from WAN ISP
Lots of people have the same issue, but I cant fix mine. I tried the TTL hack, didnt make a difference. I see the ISP allocating me the IP address, they send an offer and then it does nothing. I have...
View ArticleL2L Phase I & Phase II Tunnels Are Both UP - Even Though We Are Still Getting...
Hello to all..... We recently set up an L2L VPN tunnel with another company. The issue is that - even though both the phase I & phase II tunnels came (and remain) up, we also continue to see VPN...
View ArticleSRX - query
Hello All ,This may be very simple question for you people bt i am not able to think why this is happening so asking your help or insight on the same .I have an ip on trusted interface on srx and i...
View ArticleClik here to view.
SRX550 IFP error
Hi all Can someone tell what this error means please? IFP error> ../../../../../../../src/pfe/usp/control/applications/interface/ifp.c@1762errno=1000) ifp_ifa_del_handler : patricia_add failed...
View ArticleSRX_Remote_Access_To_WACs
Hello Team , This is with regards to remote access to WACs which is not happening from specific ips and below is the brief explanation on the same . This installation is for a hospitality group and...
View Article