I have an srx 240 and three Asus AP's on the srx. Junos 11.4xxx . Connecting to the srx the Asus/s are 1 gbps. The srx is in layer 3 mode. I get use of queue 3 "network-controlled", but not best effort. QOS/COS is in use of the default schedulers/classifiers which means it is mostly best effort.
1. Do I have to explicitly call best effort on that port ,,, ge-0/0/13 ?
2. It has the "network-controlled" queue operating. Can I make that to 95% or so? Instead of using best effort. The Asus/s are in routed mode too.
The srx is ethernet switched at the Asus ports.
What do I need to do?
The "network controlled" queue is only at 5% of the bandwidth.
Is it really probably transmitting best effort?
I have QOS on in the Asus/s.
1. Do I have to explicitly call best effort on that port ,,, ge-0/0/13 ?
2. It has the "network-controlled" queue operating. Can I make that to 95% or so? Instead of using best effort. The Asus/s are in routed mode too.
The srx is ethernet switched at the Asus ports.
What do I need to do?
The "network controlled" queue is only at 5% of the bandwidth.
Is it really probably transmitting best effort?
I have QOS on in the Asus/s.