How do you boot from usb from => mode?
It appears the JUNOS image is missing. I have downloaded another JUNOS image from a healthy SRX240. However, I cannot figure out how to boot from USB and save the new JUNOS image from the mode I am in...
View Articlesrx4600 cluster connected direct to mx10003 pair
Hi experts,The customer want to connect there new srx4600 cluster direct to a pair of mx10003 (not via switch layer).The only working solution I can see is to create bridge domain + vrrp in both...
View ArticleAutomated configuration backup - SRX345
I would like to automate the backup of the active configuration file for an SRX345 to be sent to a remote FTP Server. This should be done every 6months (I.e every 1st of June and every 1st of Dec) and...
View ArticleThe internet loopback 127.0.0.0
I have read that this address is the internet loopback which exists on all internet appliances. I assume. Anyway, is it necessary to set this in the lo0 of the srx?Does anyone do this?Seems as though...
View Articlehow to specifically locating a new creating security policy in the sec policy...
Hi all, There is a high number of security policies on srx device. I like to ask about it is possible to locating a security policy in the security list during to creation of a sec policy not after...
View ArticleIs it safe to manually delete files from /var/transfer/config on a SRX3400?
Hello, we have a SRX3400 cluster configured with "set system archival configuration transfer-on-commit". Now I realized that the secondary node was not able to transfer its config file to the...
View ArticleOpenVpn issue with rerouting interfaces
Hi guys,New to this forum, so forgive me if I placed in wrong topic my issue. The issue: I have an Openvpn server behind SRX with static nat. Everything works ok after the successful connection of...
View ArticleVPN issue Licenses buyed
hi there, by mistake, i buyed 20 licenses remote access VPN, i understand that works only NCP client, i really need 20 dyn VPN with pulse secure access. Any way for solving this trouble. attach output...
View ArticleDefault interface to start Skyatp session from
Hello I have a problem regarding connecting to Skyatp cloud.the Problem is i can only ping the internet from specific interface.If i dont specify the source interface i cant ping or have a DNS...
View ArticleSRX220 4G Backup
Hi All I'm wondering if anyone has configured a 4G backup on a SRX220? If so or if you think you know, what is the best way to do this? This there a card that my client can purchase that can be...
View Article802.1Q on Lines SRX
Hello, Can you tell me, what kind of series SRX support 802.1Q? Thank you
View ArticleCPU less FPC
Hi allThe following output is not usual that all time we are seeing -CPU less FPC as there was no high utilization on RE and device -SRX is functional. What is the reason JUNOS is not showing the...
View ArticleOPC Support on SRX
I need to allow OPC DA, OPC HDA, OPC A&E which is based on Windows DCOM, through SRX320 Junos firewalls.Is it fully supported on Juniper firewall? How can I define access rules?
View ArticleSRX300 No bootable media found. Entering loader prompt.
I encountered OS corruption issue, so I tried to boot from USB drive. Then I met the following error loader> install file:///junos-srxsme-15.1X49-D180.2-domestic.tgzTarget device selected for...
View ArticleSIP voice service from l2 vlan to internet through SRX345
Hi to all, I have a customer who has an SRX345 as a gateway. In its ge-0/0/1 interface has two vlan, the default vlan untagged and the voice vlan tagged. In the voice VLAN, the SRX acts as dhcp server...
View ArticleVPN Issue: KMD_VPN_TS_MISMATCH: Traffic-selector mismatch
We have a IPsec site-to-site VPN from a SRX300 to SRX340. The VPN connection is working but after x hours (24 to 48 , a week sometimes) the VPN got dropped and the only way to get it back up is...
View ArticleSRX 300 Cluster load balancing not working properly
Hi,I've set up an SRX300 Cluster for a customer. I've got one cable from each member running to the customer switch in a reth interface, and have two 100Mbps WAN links, one on ge-0/0/3 and one on...
View ArticleSRX340 - Prioritize VPN traffic
Hi All, I would like to ask if you can help me to prioritize VPN traffic based on destination IP. Network setup is very simple - client has main office and DB server in Cloud. There is a VPN tunnel...
View ArticleQOS/COS, best effort doesn't transmit
I have an srx 240 and three Asus AP's on the srx. Junos 11.4xxx . Connecting to the srx the Asus/s are 1 gbps. The srx is in layer 3 mode. I get use of queue 3 "network-controlled", but not best...
View ArticleNAT Configuration Question
Hi, I have an SRX 1400 cluster and I can't find any config snip to perform the following NAT. I have an internal machine on 10.10.12.50 (TRUST) and I want to source NAT this to 195.24.23.19 (UNTRUST)...
View Article