Good Evening
I have notice alot of our IPS down here are now running IPOE. The issue is that the SRX thinks everything is ok if there is an upstream issue as it only needs to try every few hours to renew its IP address via IPOE/DHCP. Is there a safe way to reset the interface or flush the route table of 0.0.0.0/0 discovered by dhcp if there is a ISP outage? The issue is that the net hop is not working due to the fault 0.0.0.0/0 path still in the routing table. Disbaling the interface is easy using events scripts but we want to ablitliy to just flush the dhcp route so that when the service comes back up again it will relearn that route. Yes I know having bgp or BFD is a better option but down here we have to deal with the NBN which using IPOE for most of there RSP's