Hello-
I have an SRX300 and have created quite a few port forwarding instance. I recently created one it it works intermitently. I am connecting to an NVR with a web browser and I have 2 issues:
Going to the URL, say http://11.22.33.44:1080, sometimes the page comes right up, sometimes I have to wait, sometimes it does come up at all. Currently, port 1080 goes to port 1080 internally (was previously translating to port 80 on the inside). Sometimes the page comes right up, sometimes I have to wait, sometimes it does come up at all. When i have to wait or if it is not responding, running a "show security flow session destination-port 1080" does not show any results - once the connection happens, then the session flow shows up.
If the page does come up and I then start looking at the various camera views, it will run for a while and then stop. By a while, I mean that the session can last 5 minutes or 2 hours or 5 hours - there's just no rhyme or reason.
I have a PC on the inside of the network and it can connect first time, every time, and run all day.
Anyone have a clue?