SRX 1500 Major Alarm - PEM 1 Not Present.
Good Morning, Is there a way I can disable the following alarm in an SRX 1500? @ 1 alarms currently activeAlarm time Class Description2017-08-01 12:19:32 CEST Major PEM 1 Not Present...
View ArticleUnable to download latest firmware
I'm trying to download the latest firmware for my SRX345 and when i try to login to the portal as the juniper site suggests - it says my user does not have permissions. The device is registered under...
View Articlecluster active/active on firefly perimeter not working?
Hi all,May I know if someone has been test active/active cluster using firefly perimeter and is it supported or not? Im has do some simulate test but unfortunately all the reth interface that in the...
View ArticleIs there any PR that related all FPC on SRX5800 chasiss cluster suddnly...
Hi all, Yesterday i'm facing the all the FPC on both SRX5800 chassis cluster reboot by itslef at same time. The weird thing the SCB/RE not reboot so we can isolate due to power issue. I'm already open...
View ArticleSRX100 Packet Capture: limited to 1500 bytes?
Is it true that I can capture only 1500 bytes at a time with the packet capture? It can't be true. Please tell me that I am misunderstanding.
View ArticleSRX240 ASAv IKEv2 VPN
Hi all, I seem to be having a peculiar issue. Namely, I have a functioning IKEv2 negotiated IPsec VPN between an SRX240 (running 12.3X48-D45.6) and an ASAv. The problem occurs when I try to add a...
View ArticleSRX300 PROBLEMS TO PROPAGATE DHCP WITH VLANS
I HAVE PROBLEMS TO SPREAD DHCP TO A SWITCH ON AN SRX 300 AND SO I CAN PROVIDE DHCP TO AN AP WITH THREE VLAN'S TRAVELING IN GE-0/0/4 PORT. AT THE BEGINNING I DO NOT PROPAGATE THE VLAN'S THROUGH THE...
View ArticleRequest preferred IPv6 prefix with DHCPv6 client
I am migrating a Sonicwall TZ to a SRX240 using Comcast as the ISP. On the Sonicwall the DHCPv6 client was configured to send a preferred prefix and as a result my prefix never changed. However with...
View ArticleLoosing Connectivity to SRX
Hi,I have a very strange issue with SRX4100 configured with Active/Passive cluster. The LED status is blinking red then goes green for a short while and goes blinking red again. I know that it is a...
View ArticleClient loosing connectivity to SRX intermittently
Hi,We have a very strange problem where a set of workstation are loosing intra-zone and internet connectivity. The w/station works flawless then suddenly looses it connection, it can no longer ping the...
View ArticleMy VPN between two SRXs is dropping packets, how do I read JUNOS VPN trace...
My VPN between two SRX240s is dropping packets. When pinging from the external interface of one to the other its fine.When pinging the external interface of one to the internal interface of the other I...
View ArticleSRX in proxy mode
1)does SRX support proxy mode ????i know that SRX can act as a proxy for TCP connection, i found this feature in screen option chapter , 2)However i don't know how to enablt this feature ???3) can SRX...
View ArticleDynamic VPN help
I have looked through several tutorials and made many attempts, now sure where I am missing the boat. Following is my most recent attempt, no dice. (I have removed non-relevant information) With each...
View Articleaggregate multiple interface srx 1440
Dears, I need to create mulitple subinterface on the aggregate interface with vlan tagging on srx series 1440 which will connected to cisco switch, what has to be done but from srx i dont know, can...
View Articleaggregate interface srx 1440
Dears, I need to create mulitple subinterface on the aggregate interface with vlan tagging on srx series 1440 which will connected to cisco switch, what has to be done but from srx i dont know, can...
View ArticleIncrease packet size beyond Baby Jumbo frames
I am using an SRX300 in a small, but very mixed environment. The SRX connects to the Internet using PPPoE, via a European/UK spec Vigor 130 (completely different firmware from US router/modem) in...
View ArticleI think this KB have wrong statement ..
Hi All, refering to https://kb.juniper.net/InfoCenter/index?page=content&id=KB30461 it said "2017-06-22: Added that no need to reboot after 15.1X49-D70." but even i'm use D80 it still need to...
View ArticleJunos Upgradation on SRX BRANCH devices
Hi All, I am planning to upgrade SRX110HE and SRX210H remotely in our enterprise. It will be upgradation from JUNOS frm 12.1X44-D20.3 to 12.1X46-D65 on Branch SRXs. Need help with below queries:As all...
View ArticleClik here to view.
main mode
i was reading a book explaining vpn main mode & aggressive modeand i got confused when it said that in main mode the first packet doesn't contain the peer ID and thats why this mode can be used...
View ArticleDynamic VPN (somewhat works) - I need a bump in the right direction
I've managed to get a test dynamic VPN working to some degree.A bit about our architecture:Two offices - A & BAmazon Cloud - ZThe current static VPNS are:A - BA - ZB - ZEventually I will have...
View Article