"web-authentication https" not supported on SRX300 running 15.1X49-D70.3?
me@co-firewall# show interfaces ge-0/0/5 unit 0 family inet address aa.bb.cc.dd/29 ## ## Warning: statement ignored: unsupported platform (srx300) ## web-authentication https; [edit]me@co-firewall#...
View ArticleSource NAT Tanslation
I configured source nat translation and itt's not getting hits. I changed the order of the rules and issue still exist. I have destination NAT configured and it recieved hits. Any tips on...
View ArticleNCP Client for Juniper - Client-to-Site
Dear all, You know about licensing model the new client vpn? (SSL) I had information that would be released in March, but it's still not in the pricelist. I just see this:...
View ArticleTrouble with IPSEC 1 phase. SRX-220
Good day.I have an issue with 1 phase of IPSEC.I have a stand of 2 Juniper at my table. I use public IP to all it looks like reality. So I have log messages like this Mar 14 07:57:26 Node_0_Bottom...
View ArticleSRX1400 monitorung ipsec error
Good day!When I view active tunnels, I get an error show security ipsec security-associations node1: -------------------------------------------------------------------------- Total active tunnels: 5...
View ArticleSRX 3600 Packet mode
Hello , We have an SRX3600 firewall. We want to let it use as packet mode but as far as i see SRX3k series does not support packet mode. Our main problem is UDP . There is no UDP screen option except...
View ArticleClik here to view.
Advanced NAT question.
HI, I need to accept an inbound connection on a known port (6500TCP) via ISP1, then change the source and destination ip fields to be link local on the other side of the SRX. This is needed to override...
View ArticleDestination Nat
I'm trying to do a destination nat from a server to a internal server with the following configuration. The incoming server can ping the interface or gateway of the internal server but cannot ping the...
View Articledifference between using policer and forwarding class in firewall filters
Hello, I'm newbie about using bandwidth limiters, I've doing some tests with policers and forwarding classes in firewall filters, I see that both can restrict bandwidth, but I don't see exactly what's...
View ArticleConnecting 2 HA Chassis Clusters Together
I would like to connect 2 High Availability Chassis Clusters in two locations (so 4 total) to be fully redundant at both locations as well as the link between them so each SRX is accessible from both...
View Articlesource-nat with multiple ip adresses on a interface
Hello all, I have an SRX300 with multiple IP adresses on interface GE-0/0/0 Unit 0I have source nat configured to use the interface address I know i can make a Source-Nat pool to determine what IP is...
View ArticleAggregation on SRX550 in-built ports
Hi, Does anyone know if it is possible to aggregate two of the in built ports on an SRX550? Thanks
View ArticleSRX100 Routing Platform
Hi, Secure Configuration Guide for Common Criteria and Junos-FIPS for EX Series, M Series, MX Series, and T Series Devices applies to these "Routing Platforms": M Series MX Series T Series EX Series...
View ArticleSending Traffic by different providers
Hello I need some help with a trouble that I had with a client. The guy has two ISP connected to his actual firewall, a linux firewall. So he told me that this FW received all the traffic from the...
View ArticleSRX240H2 Inter-Vlan Traffic Deny Logging
Hello, I have 3 VLANs in my policies and zones and i have the following in my configuration which is setup for anything from the internet inbound and any inter-vlan traffic with deny and log for both...
View ArticleHow many routing-instance a SRX can support?
Hi ALL,we are deploying a lot of routing-instance in a multiclient enviroment but we are afraid about the capacity of SRX-1400. I would like to know how many routing-instance can a SRX-1400 (and if...
View ArticleSRX300 - DHCP and IP phone
I have an SRX300 and with DHCP configured. When I connect my laptop to the SRX, it happily receives an IP address with all the options I have associated with the config. If I connect an IP phone, it...
View ArticleDynamic VPN setup
Hi, I am trying to create a dynamic vpn connetion to my office but everything fail, can some one guide me throught the configuration ? My setup:client1: windows 10 with pulse secure from windows store,...
View ArticleClik here to view.
SRX300 basic setup
Hi.I am new to Juniper SRX300 and I am trying to setup this scenario: I want to ping each other, but I don't what I am doing wrong. Help Please? Here is some of the configuration on...
View Article