Dynamic-vpn srx220 OS 12.1X46-D35.1
Hello, I have been followed Example: Configuring Dynamic VPN (http://www.juniper.net/techpubs/en_US/junos12.1/topics/example/vpn-security-dynamic-example-configur...)to configure our dynamic vpn but...
View ArticleSRX210 - Ricoh MFP doesn't get internet connection
Hi guys, i know this post is a bit off everything but i would need somebody to check my config in order to tell me that every device connected to this network should be online. We put a Ricoh MFP C3004...
View ArticleHow to configure multiple hw-addresses on one interface
Is there a way to have one physical interface host more than one hw-address? I am connecting an SRX210 to a service provider device that is very specific on what is allowed. I am having it installed in...
View ArticleUpgrade SRX210H from 10.4r3.4
My SRX210H has been on the shelf for years. I recently got interested in dusting it off and learning it again. It currently has 10.4r3.4 on it and it took me failing to get 12.1 installed and a lot of...
View ArticleSRG 320. IPSEC vpn worked then got flakey
New SRX 320 install (SRX300-JSB), upgrade from an SSG-20 About 25 or so Avaya IP Phones with IPSEC client firmware loaded. Using local/internal xauth database. On initial installatiion, the 25 remote...
View ArticleQos in test shows high ping times
hellp have been working on my QOS that last few months, have some traffic generators in for testing maxing out hte link (3mb) and have a voice call is fine. but pinging a critical server that goes into...
View Articleissue dynamic vpn
i have a dynamic vpn and two isp, my problem is that I managed to connect but I do not get to the protected resources, but if I disable the isp that does not have the ip public and only leave the isp...
View ArticleSOHO practicality
I mostly work from my office at home. Usual stuff, computers, printers, NAS, connected TVs etc and a couple of 802.11ac capable weireless access points (moderate sized apartment), no "things", apart...
View ArticleSRX factory default
Hi all, Is there any way you can find out when the last time a factory default command was issued on the SRX firewall appliances? Thanks for you help
View ArticleForce SRX to boot from usb
Hi, I have an SRX cluster running 12.1X44-D40.2. Seems like on one node the CF has died, now it boots up, enters multiuser and crashes. I did some reserch on the internet, and, according to the...
View ArticleSRX220H2 VPN Help
Hi, I recently upgraded the Junos software on two SRX220H2s. The two units create a VPN, over the VPN we have a shared ip phone system. Since the upgrade our phone system has had an issue on the side...
View Articlerate limiting video streaming
Hi Experts, could you guys give me a link the "how to" configure rate limiting video streaming on srx. would it be much better if we use APPQos to rate limit video streaming? many thanks!
View ArticleTwo Policy based VPN with automatic failover
Is that possible to create two Policy Based VPN's with two ISP's , so that if one ISP fails then traffic will failover to the VPN tunnel created on other ISP.I have few subnets for which I want to use...
View ArticleHow to update Mini-PIM firmware???
Does anyone know how to update mpim firmware supplied here (https://www.juniper.net/support/downloads/?p=docsis#sw)? Thanks!
View ArticleCritical processes
Hi Everyone, Looking at the output of show system processes extensive - what processes do you think are critical and should always be there? Trying to think of processes where, if they are missing from...
View ArticleDynamic VPN
Hicurrenlty have 5.0 Dynamic VPN but adding Windows 10 laptops and they arent recognised. I believe I need to upgrade and believe Pulse Secure has a 5.2 version. Is there anywhere I can download this
View ArticleSRX300 guided setup fail, syntax error
Dear all, i have reset the SRX300 and try to config again. When I commit, it shows the configuration could not be unlocked and 2 syntax errors. My firmware version is 15.1X49-D60. How can i solve it? I...
View ArticleSRX220 /jail/var over capacity
Hi Everyone, Total Juniper n00b here. Our SRX220 with JUNOS 12.1X44 is running slow and after doing some digging around I learned about System Storage and that it's normal for some things to be at...
View ArticleSRX 3400 in Cluster config is synced but new configuration is not applying
Hi We have two SRX 3400 running in Cluster, in RG1 one physical interface is down so all services are running through one firewall everything was fine but suddenly when are applying new configuration...
View ArticleWhat do I need to VPN to a SRX100 from a laptop
Would like to set a SRX100 as the front facing end for management to a group of EX switches.The device connecting to it is a laptop to connect to the switches.Can the Pulse Secure client work, can we...
View Article