SRX 650 IDP Signatures Update fails
Hello.I have problem with signatures upadte for SRX 650B with junos : 12.1R6.5. I have this output: node0:--------------------------------------------------------------------------Done;No newer version...
View ArticleHow to save logs from SRX to USB drive directly without save it in srx
Hello,I have to save the log in usb directly . can it be possible to save the log directly in USB? Please help for this Thanks
View ArticleJuniper DAC (copper) cables SRX SRX, EX EX SRX EX
Hi, Any restrictions or spec configs when using these cables in SRX and EX devices with SFP module ? THS Regards, Rav
View ArticleHow to turn off "The SRX no longer provides hosting of the Pulse Client for...
When a remote user visits the WAN "The SRX no longer provides hosting of the Pulse Client for direct download." This is great but tells the whole world to us a Juniper exploit toolkit. How do I turn...
View ArticleDynamic VPN - 12.3X48-D40.5
Hi, as already stated in this other thread (http://forums.juniper.net/t5/SRX-Services-Gateway/Bug-Reintroduced-on-Dynamic-VPN/td-p/302281), I just upgraded a SRX220H2 from 12.1X47-D15.4 to...
View ArticleHow to boot the srx from usb
Hello , How can i boot the srx from usb ? i am getting the kb for install and upgrade the junos from usb . can any one please help me for this Thanks
View ArticleHow to configure SRX240 ports as switch ports
I need to link a VoIP router to our SRX240 directly(ge-0/0/2). Currently my ge/0.0.0 is for WAN and ge-0/0/1 is for LAN. How can I make ge-0/0/1 and ge/0.0.2 switch. interfaces { ge-0/0/0 { unit 0 {...
View ArticleHow to configure for pass-through the HTTPS traffic to web authentication in...
Hello ,I have configured the srx for pass through authentication for ftp ,http, telnet and https .On the srx, ftp ,http and telnet are working fine but i am not able to do the pass through the https...
View ArticleIs SRX300 support USB modem?
Hi, I've looking for explanation is SRX300 support USB modem or not. I find no explanation about that on knowledge base, datasheet, or other website. Is there anyone know is SRX300 support USB modem or...
View ArticleClik here to view.
DNS suffix for dynamic VPN on the SRX3xx platform
Hello all, I am running 15.1X49-D60.7 on my SRX320. I am using dynamic VPN. Once connected via DVPN, I cannot ping any of my internal servers by their hostnames. However, I can ping them with their IP...
View ArticleDynamic VPN DHCP relay
Hello, I am using dynamic VPN on an SRX320. Is it possible to configure DHCP for the dynamic VPN clients on a separate server and then have the SRX relay requests to that server? Or does DHCP for...
View ArticleIPIP Tunnel source with DHCP
I am attempting to set up an ipip tunnel from an SRX. The Internet interface is DHCP and the tunnel source is requiring an IP rather than an interface. My thought was to source the tunnel from a...
View Articlecisco asa to juniper srx vpn site to site not working !!!!
good eveninig i need some help in setting up vpn tunnel between srx and asa ike in juniper wont came up at all and give me this log message [Jan 22 20:56:15]10.10.10.38:500 (Initiator) <->...
View Article[S2S VPN] SRX DynamicIP Cisco IOS DynamicIP
Hi, I'm trying to setup a S2S IPSec VPN between two hosts with dynamic IP addresses based on FQDN.One node (HUB) is an SRX220 with 12.1X46-D60, second node (SPOKE) is a Cisco router with 12.4T IOS.Both...
View ArticlePatricia
Buenos dias, les consulto porque tengo un router juniper srx100, el cual tengo algunos incomvenientes con la configuracion. el problema es que si yo realizo toda la configuracion inicial, luego si yo...
View ArticleHow to Create e1/e3 interface as reth interface for chassis cluster in srx 650
Hello, Can we create e3/e1 interface as reth interface for chassis cluster in srx 650?If Yes, Can any one please share the configuration for this . how can we create e3/e1 interface as reth interface...
View ArticleInternet through Central Office
Hello, I managed succesfully to configure an IPSEC VPN from our Central Office to our branch. VPN was created over a VPN of the ISP so public IP on both ends are not really public. VPN is working,...
View Articleincreasing the bandwidth on reth interface in SRX
hi i wonder about increasing the bandwidth on reth interface in SRX is that possible ??
View Articlereboot srx 240
hello guys, how to reboot SRX 240 from command line? Is there a way to reboot device from web gui? Thank you.
View ArticleDoes it impact service when change no of reth interface?
Hi all, One quick question. Currently i'm configure no of reth interface under chassis cluster stanza for two (reth0 & reth1). Then suddnly i need to add another two reth interface (reth2 &...
View Article