public ip behind srx320
Hi there, I need to assign a public ip to a server. I have a /29 public range and use NAT for other server but this one must be accessed by public ip address without NAT, in a internal/trust zone from...
View ArticleSource nat via interface with multiple subnets
Hi all, I am struggling with a Source-Nat rule. I have the following config for the outgoing interface:interfaces ge-0/0/1 flexible-vlan-tagging; native-vlan-id 10; unit 0 { vlan-id 10; family inet {...
View ArticleOne of the server not used interface source nat?
Hi all, I have something weird on srx5800 cluster and not sure is it normal or not. I have one server that have configure "destination nat" to that server. The ip segment for the destination nat is not...
View ArticleConfigured Cisco Umbrella on the Juniper
Greetings friends, has anyone configured Cisco Umbrella on the Juniper SRX 345, SRX 240?
View ArticleSRX Remote syslog tls
Hello, Is it possible to send remote syslog messages with TLS encryption to a remote syslog server like rsyslog? Does anyone have any configuration examples for this, so far I have only been able to...
View ArticleJuniper SRX - Destination NAT with dynamic ip
Dear Juniper Geeks , I was wondering if there is anyway to configure Destination nat to my local server with Internet connection has dynamic ip address ? if yes please share configuation example /...
View ArticlePort mirroring on a SRX430
Hello, Does port mirroring work on SRX340?I was tried to configure this feature based on this:https://kb.juniper.net/InfoCenter/index?page=content&id=KB21833but it doesn't work.I see that couter in...
View ArticleRT_FLOW APPTRACK_SESSION_VOL_UPDATE interpretation
I'm working to get security alerts set up between an SRX340 and Eventlog Analyzer SIEM.I've been getting alerts that look like this:Alert Name : Default Threat,Event Name : Application Access...
View ArticleSRX1500 SDWAN EHUB Routing
I've got an SRX1500 and SRX320 in an SDWAN POC The 1500 is configured for local breakout and has a breakout policy configured for the internet tag. The 320 connects to it fine as a spoke and there is a...
View ArticleSRX integration AD
Hi juniperIf i need to log on SRX that mapping userAD with IP adddress, Does user must joining on AD?
View ArticleSRX 5800
Can someone tell me what is the maximum multicast routes supported by SRX 5800?
View ArticleSRX 240H - Block access to the host within one vlan
Hi,I have vlan (WIFI) 192.168.20.0/24 and in it a lot of wifi user devices (phones, laptops, etc.) in the same network there is a wifi controller with the address: 192.168.20.x.Clients are connected to...
View ArticleClik here to view.
Help identify part on SRX-GP-16GE-POE
Please help identify what looks like 2 memory flash cards on the SRX-GP-16GE-POE board.This SRX-GP-16GE-POE 16 port (711-062271) was purchased and came without the 2 cards.See image attached (arrows...
View Articlesrx reboot
Good day, I am reading different posts over internet and confusion reigns over the exact sequence of rebooting srx cluster for updating srx software and if "no validate" should be used.please help to...
View ArticleUnable to SSH or SFTP to fxp0 interface
I cannot open an SFTP session or SSH to the fxp0.0 interface. I can ping it. I looked in the logs and I don't see that it is being blocked. Is there something I am missing?
View ArticleWeb Filtering
Guys, how are you? I would like help with the Juniper SRX300, is there a possibility to save or create a log of all the sites that are accessed? Collecting the IP of the Local machine. I have srx300...
View ArticleJ-Web Adobe Flash Dependency
Hey everyone. Adobe has been issuing warnings in its Adobe Flash updates. Google and Firefox has been showing a warning whenever I head over to a site that uses Flash. What's more, Google has had a...
View ArticleSecurity profile recommendation needed
I want to know if we create multiple logical systems in SRX4100 then is it must to define security profile for each user logical systems as well as for master logical logical.What will happen if i dont...
View ArticleClik here to view.
SRX1500 || Control Link em1 is not coming Up whereas em0 seems fine.
Hey Guys,I'm facing one issue of Control Link, post clustering of SRX1500. As per my understanding Chassis Clustering and RG are working fine. I can see the em0 in Up state but em1 is not reflecting in...
View ArticleAdminister multiple juniper srx300 devices
Hello everyone, everything good ? What do you use to manage multiple Junipers devices? I have 30 branches using the same SRX300 equipment, however it is very laborious to change a configuration in all....
View Article