SRX340 route is Reject
I have rejected routes on a SRX340 and I don't understand why. Also, the related irb interfaces have link down. That might be the problem but yet I don't know what those irb interfaces are down. Does...
View ArticleReplacing a SSG5 with SRX100H2 in branch office
We have a hub/spoke network with a SSG140 hub running ScreenOS 6.3.0r21.0 and several branches running SSG5's with no issues.We're testing a SRX100H2 JunOS 12.1X46-D40.2 due to SSG5 EOL and am having...
View Articlesite to site vpn for policy-based issue
Hello, I configure the policy-based VPN between to site A and Site B. Unfortunately, it have some issue for that. Site A' PC can ping/remote to site B' PC, but the site B' PC can't ping/remote to site...
View ArticleSRX NAT internal routing issue side effect.
A few weeks ago, I posted an issue whereby internal users in the trust zone couldn't access servers also in the trust zone that had static NAT set up in the untrust zone using public url or ip address....
View ArticleI am unable to download software for SRX100
I am unable to download software for SRX100 I receive the error message You have encountered this error because your account privaleges do not permit access to the information of the service you...
View ArticleSRX cluster running two different versions of Junos. Easy fix?
I have an issue with our SRX240 firewall cluster. Due to oversight in the upgrade process, our secondary node was left running JUNOS 11, and our primary running 12.1X46-D40.2. I have a remote console...
View ArticleSRX300 usb serial console driver - which one?
Hi, anyone in here who knows which (Windows) driver there should be installed to use the USB serial console port on the new SRX300 gateways? I'm not able to find information about which chipset that...
View ArticleDual ISP SRX, two Virtual Routers
I am hoping to get assistance on something I've seen multiple good replies to. Namely the non-bgp dual ISP SRX connection. My additional requirements are that I need static Nat pools to the same device...
View ArticleClik here to view.
Connectivity Between 2 SRX
Hi, I have connected 2SRX diectly but not able to establish connectivity.Please find the below configuration interfaces { ge-0/0/0 { unit 0 { family inet { address 1.1.1.1/30; } } } ge-0/0/1 { unit 0 {...
View ArticleIs the zone vpn a must for Route-based VPN?
Hi Experts, I am refering to the below link for route-based VPN. I see besides trust/untrust zone, another zone vpn-chicago is created. And the policy is between trust zone and vpn-chicago zone. But...
View ArticleSRX100 ARP cache problem
Hello, I have a ppp connection to the ISP through ADSL, and need ARP entries to be seen even if cached for a very short time. But I can only see static route's MAC through my pp0 interface in untrust...
View ArticleHow many members on SRX HA Cluster ?
Hi, On SRX 550/650, we areconstrainedonly 2nodes perHA cluster ?We can't have 3 or 4 nodes ? Like a server cluster ? Thanks in advance.Best regards.
View ArticleMini PIM compatible for all SRX device? (SRX-MP-1VDSL2-R)
Can anyone tell me if the new min Pim SRX-MP-1VDSL2-R is compatible with an SRX240?
View ArticleHow long should an upload and install take
I am upgrading my SRX100 to 12.1X46-D30 using j-web. It just sits for hours and does nothing. I have the file on my desk top. Browse to it and hit upload and install. My srx was never updated...
View ArticleLogical System in SRX
Hi all, I need to know 1) what are the physical requirments for logical-system in srx. do i need to have seprate physical interface for each logical system ? 2) is this possible design where i have the...
View ArticleDHCP not working properly on juniper
DHCP is not working very well for my Juniper SRX or maybe someone needs to point me in the right direction dhcp { pool 10.10.0.0/16 { address-range low 10.10.1.1 high 10.10.255.254; maximum-lease-time...
View Articleroute failover using ip-monitoring not working
Hi All, I have tried to configure route faiover using ip-monitoring,please see the configuraion below. set services rpm probe BSNL test BSNLTST target address 10.31.0.1set services rpm probe BSNL test...
View Articleaddress-assignment pool static options
Within a DHCP pool, i have two hosts that require a different boot-server than all of the other hosts. With the "old" method, it would be pretty simple: system { services { dhcp { pool 10.0.0.0/24 {...
View ArticleDynamic VPN, Pulse Secure Error 1453
Hello, I've been strugging to set up dynamic vpn on my SRX220H2 for many weeks now. My Pulse Secure client is on a Windows 7 laptop. When I try to log in with Pulse Secure, it says "Connection...
View Articlehelp with zones and D-NAT trying to learn more about these
In and effort to learn more about these SRX boxes, I got a used one for my house (along with a 24poe ex2200, I have a couple question that i have given the "5minute rule" but i cant figure out. 1. i...
View Article