On-box reporting error
Upon uploading a configuration to an SRX320 running 15.1X49-D190.2 I received the following error: Enabling on-box reporting on the built-in eUSB storage may reduce the life of the storage On...
View ArticleSRX550M Upgrade Path
Hello All, Have a SRX550M currently running 15.1 that I'd like to get upgraded to the recommended version of 18.2. Do I need to first jump to 17.4
View ArticleSRX 340 Factory Reset
Hi All, I have a SRX 340 that I performed a 15-second factory reset on. When I try to login, the root password is not blank. Has anyone else experienced this issue? I can't recover the root password...
View ArticleSRX DHCP stac binding not working properly
I am trying to set up a DHCP server on an SRX 345 device. The DHCP server should send back some options (bootfile, router, domain-names...). The DHCP is involved in the boot process so a static dhcp...
View ArticleSRX DHCP static binding not working properly
I am trying to set up a DHCP server on an SRX 345 device. The DHCP server should send back some options (bootfile, router, domain-names...). The DHCP is involved in the boot process so a static dhcp...
View ArticlePersistent NAT with multiple Public IP address
Hi folks, I have an interesting dilemma that we're trying to get working with Persistent NAT and two internet connections on the SRX110H2. Each has a static default route; one with higher...
View ArticleMaximum distance between two nodes for srx1500 chassis cluster
Hi Juniper Masters, what is the maximum distance to cluster the 2 SRX1500? thanks!
View ArticleDHCP not working properly when multiple pools are defined
I am trying to set multiple subnets on SRX device each subnet has its own DHCP pool. I have 5 ports each port is connected to a group of servers. So, I configured 5 pools and 5 groups each group...
View ArticlePPPoE communication is not possible with PPPoE Server & Client of SRX
I am verifying SRX's PPPoE Server & Client with reference to the following video, but I cannot communicate with...
View ArticleUpgrade SRX345 from 15.1X49-D190.2 to 18.2R3.4 fails: certificate 'device':...
Upgrade SRX345 from 15.1X49-D190.2 to 18.2R3.4 fails with the following errors: request system software add /var/tmp/junos-srxsme-18.2R3.4.tgz no-copy unlinkNOTICE: Validating configuration against...
View Articleerror: the redundancy-interface-process subsystem is not running
Hi, I have configured chassis cluster srx340 in transparent mode. All interfaces are up as expected however I can't ping from my untrust to trust zone after troubleshoooting, I ran "show interfaces...
View Articleflow session
Hi I am using Juniper SRX240 and for last week I find records like this in session table. Session ID: 668, Policy name: allow-public-mail/11, State: Active, Timeout: -1, ValidIn: 47.74.61.85/60414...
View ArticleInternet failover with dual-ISP configuration - selecting the "primary" ISP
I have an SRX300 running version 15.1X49-D150.2I have it configured for dual-ISP configuration using IP monitoring. This works great. My problem is when both connections are working, I have a perferred...
View ArticleClik here to view.
Is it possible to implement this topology? image
Good morning, I would like to know if my Juniper SRX550 could support this topology, thanks in advance.
View ArticleIKE negotiation failed with error: IKE gateway configuration lookup failed...
Hi folks, I am getting the following log message when I try IKEv2 VPN from my iPhone ios 13 to my Juniper SRX 320.Please note that I can connect to my Juniper using Pulse Secure using my laptop...
View ArticlePPPoe not connecting
Hello, I have a SRX320 with a VDSL card that worked first time to successfully dial out but then after that it suddenly stopped working My pppoe config is as follows: show configuration interfaces...
View ArticleRoute-based ipsec SRX4100-ASA traffic selectors 1 subnet to many behind ASA
The IPsec configured is failing at phase 2 with the error "[Nov 5 11:02:00][165.X.X.X <-> 74.X.X.X] Authenticated Phase-2 notification `No proposal chosen’ (14) data size 4 from 74.X.X.X for...
View ArticleClik here to view.
Enable multicast traffic into the same security zone
Hi, I would like to send a multicast stream from a source connected on one interface to an other interface on an Juniper SRX240 (12.1X46). Mutlicast source is connected on ge-0/0/3 interface.Clients...
View ArticleSecurity Director Hit Count shows NA
I have a few rules that show the designation "NA" for the hit count. This means "not available". Does anyone know why the hit count would be unavailable for these rules?
View ArticleI'm close to getting it, what is missing to get ping between two virtual...
Hello everyone, after many failed attempts, I think I am very close to pinging two virtual routers connected through a virtual switch, I would greatly appreciate your help, thank you very much.My...
View Article