STP protocol problem
Hello Everybody,I have following setup modem --> SRX100H2--> Netgear GS716Tv3 switch--> (rest of th network including Hyper-V infrustructure, DC/DHCP, and Unifi WAP) On SRX100H2 I have...
View ArticleSRX Dynamic VPN Issue - Pulse secure Mac/Android
Hello,I have an SRX 220 that works fine with Dynamicc VPN on Windows 7 and with Pulse Secure.It doesn't seem to connect with Android or Mac/Apple/IOS I get "Opps something went wrong. Please try again...
View Articlesupport RFC 5382, 5508 on SRX
Hi experts!are the RFC5382 and RFC5508 supported on SRX devices?On url http://www.juniper.net/techpubs/en_US/junos11.2/topics/reference/standards/nat.html says that RFCs are sopported on router with...
View ArticleHow can I use 2 WAN (ADSL+VDSL) links at once?
Daft question coming up! I have a site with an SRX320 and 2 Mini-PIMs, one for ADSL and one for VDSL. When setup, I have the latter as the preferred gateway i.e. routing-options { static { route...
View ArticleHow to check for echo-reply packets?
I am trying to investigate some odd behaviour on one of our VDSL connections (SRX320). Via this connection it is not possible to ping (or at least receive the responses from) 8.8.8.8, but I can ping...
View Articleinternet unstable during windows update
Good day, We have multiple locations with variouse internet connections (from 10 to 500 mbit fiber / cable / vdsl / 4G)The most used SRX is the 320 but we have it with other models as well. all...
View ArticleInternet traffic not working when connected to Zyxell LTE 3301 in bridge mode
Internet connection trough my SRX 300 when connected to my Zyxell LTE 3301 modem doesn't work. If LTE 3301 is configured to have own NAT and DHCP then traffic works. If I connect my PC directly to LTE...
View ArticleLog message when PFE has been synced with RE
Hi everyone. I am trying to find a way to confirm if PFE has been synched with RE whenever we perform configuration changes without going into shell mode.I tried:commit | display detailBut I do not see...
View ArticleError when create the objets Elements
I,Please can some one explain me the difference between Global address book and Zone address book ?I cannot create objects on Zone address book This is the error whan am triying to create :...
View ArticleSRX 340 both routers as Master- no advertisement received
Hello, I have been experiencing strange issue with Juniper SRX 340 using firmware 15.1X49-D70.3. Vrrp is setup on both routers but advertisements "sent" not received on both routers. host-inbound...
View ArticleIs it true there is limitation on chassis cluster to use AE instead RETH?
Hi all, I have some issue and need feedback from all of you guys that has been setup chassis cluster with ae instead reth. Some of internal PR said it's expected the entire the ae interface with flap...
View ArticleJuniper SRX default authentication algorithm value for VPN connection
Hi, Is there such a thing as a defaul value for the phase 1 authentication algorithm for Juniper SRX550? I noticed that after I configured the policies, I forgot to set the authentication algorithm for...
View ArticleClik here to view.
Juniper SRX - Destination NAT not translating
Hi Everyone, I'm having problems making DNAT/Port Forward work on my SRX345 device. I'm trying to make a PPTP connection to be port forwarded to Internal Server. Dnat Pool = Server .112 and port...
View ArticleSRX4100 ipd with sophos antivirus
Dear CommunityA have a cluster of srx4100 devices, version 18.4R1, and i want to enable idp and sophos antivirus. Firewall is configured with 4 logical systems ( root + 3 lsys) . From your experience...
View ArticleVPN IPsec between SRX345 and NS5GT with dynamic IP address (policy based)
Hi to all,I'm trying to configure a VPN conection between one SRX345 with static IP address and an Netscreen NS5GT with dynamic IP address... I've read a lot of community's articles but the connection...
View ArticleSRX4100 idp with sophos antivirus
Dear CommunityA have a cluster of srx4100 devices, version 18.4R1, and i want to enable idp and sophos antivirus. Firewall is configured with 4 logical systems ( root + 3 lsys) . From your experience...
View ArticleLimitted access to my SRX300
Hi, Please can somme one tell me how to restrict Administration of my SRX300 series only to one network 192.168.0.0/24.I have a lot of subinterfaces with several networks and from all these networks i...
View ArticleJWEB on SRX1500 using junos 18.4 cannot open?
Hi all, I just power on SRX1500 with upgraded junos using 18.4R1. But unfortunately jweb cannot open. On the host-inbound rule i already put permit all. I already restart jweb service but still same....
View ArticleClik here to view.
JATP collector
Dear juniperI install VJATP as all in one mode. A collector is not working, process PCAP-TAP-ICAP is not running. How to fix it.
View ArticleUpgrade JSB to JSE
Is there an upgrade path to bring a JSB license up to a JSE license. Thank you. - Brian
View Article