SRX240H2 - IDP License.
Hi all,i would like to know if the SRX240H2, can support IDP license to be installed, and if is still possible to buy license to IDP to this plataform. Thanks,
View ArticleCoS/QoS dual IPSec tunnels
Hi, Wonder if someone can point me in the right direction with this. Despite much googling and experimenting with iPerf, I am not really getting anywhere with it.What we have is dual WAN links with two...
View ArticleSplit tunnelling in remote access vpn.
Hi to all, I have configured a remote access VPN with NCP client on a SRX345. It's working fine, from the remote client I can access the internal network through VPN access, but all the traffic is...
View ArticleIssue with login class - Configuration couldn't be un-locked.
Hi experts! I have created a custom login class 'WEB1" to restrict the commands and the configuration changes to be made by a particular user. The commands work exactly as expected when the user logs...
View ArticleDoes local-address in the IKE gateway work with a preferred address out of a...
Hello all. Trying to create a VPN using an external interface that has two inet addreses. I know about the local-address knob and I am using it. IKE is failing, but only on the side with dual IPs....
View ArticleError during the update SRX4600 cluster
HelloI just wanted to update my new srx4600 clusterif I have the command request system software in-service-upgrade /var/tmp/junos-srxhe-x86-64-18.4R1.8.tgz rebootI will follow the output ode0:Chassis...
View ArticleSRX Intra-area OSPF route filtering
Dear All, I am trying to find a way to filter intra-area OSPF filtering in a hub and spoke topology.The objective is to prevent spoke to spoke routing advertisement.Ospf import/export policies are...
View ArticleIPv6 - IPCP on VDSL2-A MPIM
Hi, I have IPv4 addresses being assigned correcty on the VDSL2-A MPIM but I also need to allow the IPCP IPv6 allocated address to be assigned. Here is the IPv4 configuration that works fine: set...
View ArticleVSRX : ge-0/0/x down
Hello. I'm playing with vSRX (with active service contract) and I am totally stuck with Junos: 18.4R1.8.1. I exported my configuration file2. I deployed a brand new VM3. I put 16Go ram and 8 vpu...
View ArticleAT-1/0/0 interface not showing
Hi I have recently installed a vDSL card into my 320 (1x VDSL2 mPIM (RoHS)) but I wish to use this for ADSL rather that VDSL. I believe that this card is switchable and indeed is in use as ADSL on...
View ArticleMigration from SG-300-10 to SRX220 Configurarion notwkirng
Hi, guys thanks for help and your time i have a SG-300-10(Cisco Crap) and i want to migrate to my SRX220H, but when i change the data line to the SRX220 i can ping the IP 10.10.2.25 in the VLAN 100...
View ArticleSRX650 won't route packets and I have no idea why
I've recently spent way too much time trying to get an SRX650 to properly route packets between two networks without any success. Hopefully someone here can point me in the right direction. The basic...
View ArticleSRX300- Can't see the RDP session in logs
Morning guys, I am trying to initiate RDP session on a server that is behind the SRX. However, I don't see any logs associated with the RDP session when I issue the command "show log messages".Is there...
View ArticleClik here to view.
Site to Site between Cisco (Hub) and SRX 100 (spoke)
Attempting to use SRX100s as spokes for two locations. The tunnel temporarily establishes then bounces. Also I would like to be able to define ike gateway as a ddns address, however when I used fqdn no...
View ArticleSRX300 J-Web Unusable
I am working with a SRX300 running Junos 18.4R1 and the J-Web UI is unusable. I can access the login page, navigate to certain configuration pages, for instance Configure->Security...
View ArticleClik here to view.
Access to remote VPN site over Dyn VPN
Hi All,I configured Dyn VPN and I can connect to my local resources but cannot access the resources on remote VPN site. I have two vpn sites : site A (172.16.4.0/24) and site B(10.36.4.0/24) both...
View ArticleSRX 320 with 4G
Hi,I have been working on a config for a 4G service on a SRX320 for a few days now, but I have come across one main things that has me stumped and a few other things that I am scratching my head over....
View ArticleSRX 240 CPU_THRESHOLD_EXCEEDED
Hello, somebody help me please with this problem. Avarage CPU load was doubled. First peack on graphic (in attached file) cause is enabled security traceoptions with packet mode logging, after this...
View ArticleSCTP multi-home support with static NAT
Hi, all, SRX is to provide static NAT services for a multi-homed SCTP end point in trusted zone, will SRX translate IP header address AND IP address embeded in SCTP header's INIT block? I could not...
View ArticleSRX and Virtual Channels
Hello all, Would anyone be able to clarify something for me? When using virtual channels with 2 un-shaped channels, so that they share the bandwidth equally, how do you set the bandwidth of the logical...
View Article