Hi all,
this is my first post and I'm pretty newbie about Juniper.
I'm trying to setup a new cluster chassis with a couple of SRX 300 That will be connect n°2 subnet (backend and database)
I thought to this configuration but I have some trouble how to configure the chassis cluster/redundant interface, could anyone help me?
My idea is:
- in normal condition the traffic of the 2 subnets pass through SRX300-A on interfaces ge-0/0/0 and ge-0/0/4
- from normal condition if SW 01 fails, the traffic switch to SRX300-A on interfaces ge-0/0/1 and ge-0/0/5
- from normal confition if SRX300-A fails, the traffic switch to SRX300-B on interfaces ge-1/0/0 and ge-1/0/4
- from this above condition, if SW 01 fails, the traffic switch to SRX300-B on interfaces ge-1/0/1 and ge-1/0/5
See attachment
I've probably said several things wrong, be patient 
Regards
Simone