SRX 3600 is showing following in log chassid
CHASSISD_FASIC_HSL_ERROR: Fchip (CB 0, ID 0): link 1 failed because of crc errors
CHASSISD_FASIC_HSL_ERROR: Fchip (CB 0, ID 0): link 2 failed because of crc errors
;;;
;;
i know it is
The chassis process (chassisd) detected an error for the indicated high speed link (HSL)
for the indicated F chip on the indicated Control Board (CB)
any soution following has been checked .
https://kb.juniper.net/InfoCenter/index?page=content&id=KB23384&actp=search#
also output of > show chassis fabric plane
gives
FPC 2 : pfe 0 link error
the FPC has been replaced but is it becuase of this FPC as it 10G interface card whose intefaces are down.
any solution as firewall is hanged up intermatently .