hello,
SRX100 isnt booting up (status LED is orange), it sends me to u-boot automatically and i cant do anything from there. here is the output may need to detect problem or advice me what can i check or what can i do
U-Boot 1.1.6-JNPR-2.8 (Build time: Feb 10 2015 - 01:03:41)
Initializing memory this may take some time...
Measured DDR clock 266.62 MHz
SRX_100H2 board revision major:1, minor:0, serial #: BZ2915AF0732
OCTEON CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 2048 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 4 MB
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... Read Error for STMicroelectronics device 0
Nandflash devide may halt due to unexpected reset, please issue power cycle.
If power cycle can't recover the device, please issue command :
<nand_format> at console prompt to format
1 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
Boot Media: nand-flash usb
Net: pic init done (err = 0)octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
i've tried nand_format and nand_patch_verify
=> nand_patch_verify
Checking NAND Patch signature:
ERROR: CTL:TIMEOUT
--Host Channel 0 Interrupt: Data Toggle Error--
--Host Channel 6 Interrupt: Transaction Error--
--Host Channel 3 Interrupt: Transaction Error--
--Host Channel 7 Interrupt: Transaction Error--
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
i cant access loader too, when i'm trying "boot" command in u-boot it does nothing
=> watchdog start
=> boot
=>
U-Boot Exception, Cause: NMI
Problem encountered during u-boot stage.
zero: 00000000 at: 00000062 v0: 00000828 v1: 80011800
a0: 00000060 a1: 00000828 a2: 00000000 a3: 00800118
t0: 00727bbf t1: 800aa8d8 t2: 00000840 t3: 00000000
t4: 800aa5a0 t5: 800c507c t6: 00000020 t7: ffffffff
t8: 80015ef8 t9: 8005d3e0 s0: 00000000 s1: 00000000
s2: 80011800 s3: 00000828 s4: 8005d48c s5: 1563fe91
s6: 00000001 s7: dea27065 k0: aaaaaaaa k1: aaaaaaaa
gp: 800cab70 sp: 80011d28 s8: 80016141 ra: 8005d774
sr: 504800e5 mullo: 00000000 mulhi: 00000001 badvaddr: 00000000
cause: 40008000 pc: 3f9de677
Waiting for the backup U-Boot to trigger.
here is output of printenv
=> printenv
bootdelay=1
baudrate=9600
loaddev=disk0:
boot.devlist=nand-flash:usb
filesize=216f8
fileaddr=100000
gatewayip=192.168.1.123
netmask=255.255.255.0
ipaddr=192.168.1.201
ethaddr=88:a2:5e:02:af:00
nand_error=1
autoload=yes
boot-current=primary
serverip=192.168.1.222
boot.status=0x1
boot.current=secondary
bootcmd=
loadaddr=0x20000000
numcores=2
boot.ver=2.7
boot.upgrade.loader=0xbfe00000
boot.upgrade.uboot=0xbfc00000
boot.btsq.start=0x003fa000
boot.btsq.len=0x00002000
boot.env.start=0x003fe000
boot.env.size=0x00002000
boot.upgrade.uboot.hdr=0x00000030
boot.upgrade.uboot.data=0x00000100
boot.upgrade.loader.hdr=0x002fffc0
boot.upgrade.loader.data=0x00200000
stdin=serial
stdout=serial
stderr=serial
env_addr=0xbfffe000
env_size=0x2000
flash_base_addr=0xbfc00000
flash_size=0x400000
ethact=octeth0
post.usb=PASSED
post.eeprom=PASSED
post.memory=PASSED
post.uboot-crc=PASSED
Environment size: 884/8188 bytes