Hello,
i wanna do thiis :
I have a VPN Tunnel from "SRX2" to "Anything" and this tunnel works fine. The Lan from "SRX2" can reach the "LAN2". Also, i have a tunnel beetween "SRX1" and "SRX2". "LAN1" can reach the LAN from "SRX2" as well. But now, i wanna reach the "LAN2" from "LAN1" across the two VPNs, but it doesn't work. Both Tunnel will be established about the same interface on SRX2.
The session output on SRX1:
Session ID: 66034, Policy name: xxxx, State: Active, Timeout: 56, Valid
In: 192.168.66.10/11333 --> 1.2.3.4/512;icmp, If: reth8.0, Pkts: 1, Bytes: 60
Out: 1.2.3.4/512 --> 192.168.66.10/11333;icmp, If: st0.10, Pkts: 0, Bytes: 0
There is no session on SRX2.
So, what i have to do to make it works?
bye,
steffi