Hi everybody!
I have an SRX divided in 3 logical systems: I would like to grab the SNMP values of the string jnxJsSPUMonitoringObjectsTable for each of the logical system I have configured.
If I walk that string I can just get the result per node
show snmp mib walk jnxJsSPUMonitoringObjectsTable
jnxJsSPUMonitoringFPCIndex.1 = 1
jnxJsSPUMonitoringFPCIndex.9 = 1
jnxJsSPUMonitoringSPUIndex.1 = 0
jnxJsSPUMonitoringSPUIndex.9 = 0
jnxJsSPUMonitoringCPUUsage.1 = 0
jnxJsSPUMonitoringCPUUsage.9 = 0
jnxJsSPUMonitoringMemoryUsage.1 = 66
jnxJsSPUMonitoringMemoryUsage.9 = 66
jnxJsSPUMonitoringCurrentFlowSession.1 = 421
jnxJsSPUMonitoringCurrentFlowSession.9 = 244
jnxJsSPUMonitoringMaxFlowSession.1 = 819200
jnxJsSPUMonitoringMaxFlowSession.9 = 819200
jnxJsSPUMonitoringCurrentCPSession.1 = 284
jnxJsSPUMonitoringCurrentCPSession.9 = 242
jnxJsSPUMonitoringMaxCPSession.1 = 1048576
jnxJsSPUMonitoringMaxCPSession.9 = 1048576
jnxJsSPUMonitoringNodeIndex.1 = 0
jnxJsSPUMonitoringNodeIndex.9 = 1
jnxJsSPUMonitoringNodeDescr.1 = node0
jnxJsSPUMonitoringNodeDescr.9 = node1
jnxJsSPUMonitoringFlowSessIPv4.1 = 418
jnxJsSPUMonitoringFlowSessIPv4.9 = 241
jnxJsSPUMonitoringFlowSessIPv6.1 = 3
jnxJsSPUMonitoringFlowSessIPv6.9 = 3
jnxJsSPUMonitoringCPSessIPv4.1 = 281
jnxJsSPUMonitoringCPSessIPv4.9 = 238
jnxJsSPUMonitoringCPSessIPv6.1 = 3
jnxJsSPUMonitoringCPSessIPv6.9 = 4
As "Best Practice" suggests I can also run jnxJsSPUMonitoringCurrentTotalSession but that will give only for the system-level total session. The correspondig CLI for the trap I'm looking for is:
show security flow session summary logical-system ls-application
node0:
--------------------------------------------------------------------------
Flow Sessions on FPC1 PIC0:
Unicast-sessions: 93
Multicast-sessions: 0
Services-offload-sessions: 0
Failed-sessions: 0
Sessions-in-use: 290
Valid sessions: 93
Pending sessions: 0
Invalidated sessions: 197
Sessions in other states: 0
Maximum-sessions: 819200
node1:
--------------------------------------------------------------------------
Flow Sessions on FPC1 PIC0:
Unicast-sessions: 95
Multicast-sessions: 0
Services-offload-sessions: 0
Failed-sessions: 0
Sessions-in-use: 106
Valid sessions: 95
Pending sessions: 0
Invalidated sessions: 11
Sessions in other states: 0
Maximum-sessions: 819200
Any suggestion? 