Hi, experts,
Just can not fix the RPM issue in icmp-ping test, your expert advice is highly expected:
I am running SRX345 ( but it should not be the hardware and Junos issue, due to two out of 5 SRX345 hardware have the issue ).
As my following RPM configuration ( same configuration for all my network infrastructure scenarios ):
set services rpm probe WW_Line_Test test ISP_100.60.100.209 probe-type icmp-ping-timestamp
set services rpm probe WW_Line_Test test ISP_100.60.100.209 target address 100.60.100.209
set services rpm probe WW_Line_Test test ISP_100.60.100.209 test-interval 5
set services rpm probe WW_Line_Test test ISP_100.60.100.209 destination-interface reth1.100
show service RPM probe-results:
-------------------------------
Owner: WW_Line_Test, Test: ISP_100.60.100.209
Target address: 100.60.100.209, Probe type: icmp-ping-timestamp
Destination interface name: reth1.100
Test size: 1 probes
Probe results:
Request timed out
Mon Dec 30 23:42:59 2019
Mon Dec 30 23:43:02 2019
Results over current test:
Probes sent: 1, Probes received: 0, Loss percentage: 100.00000
Results over last test:
Probes sent: 1, Probes received: 0, Loss percentage: 100.00000
Results over all tests:
Probes sent: 18, Probes received: 0, Loss percentage: 100.00000
RPM log:
Dec 30 23:42:54 PING_TEST_COMPLETED: pingCtlOwnerIndex = WW_Line_Test, pingCtlTestName = ISP_100.60.100.209
Dec 30 23:42:54 RTM_CHANGE gencfg for probe WW_Line_Test, test ISP_100.60.100.209 to state PASS
Dec 30 23:42:54 rmop_calc_jitter: rdiff: 1006358, sdiff: 1006142, jitter: 216
Dec 30 23:42:54 test_done: sent 2, test 840
Many thanks in advance