There is any way to allow zone for bridge interface to route zone?
I tried to configure srx550m with redundancy wan link.
Wan1 L2 interface = untrust zone /192.168.10.0/24
Internal l2 interface = trust zone /192.168.10.0/24
Irb.0 = 192.168.10.2/24
Wan2 L3 interface = isp2 zone / 172.16.10.1/24
1.Is possible to route traffic from internal to wan2?
2.Also can irb in layer2 allow traffic to forward to route interface.
3. Can irb interface provide dhcp services?
4. Is configure nat is allow on L2 interface?
Please advise on the design requirement.