SRX3600 Fabric link cable swap

Hi, 

We have a SRX chassis cluster which are throwing input errors and we want to replace the cable. Can we replace the fabric link without causing any traffic disruption / failover if the nodes are healthy? 
Is there anything we need to verify before doing that?

show interfaces ge-0/0/0 extensive | match err 
  Link-level type: 64, MTU: 9014, Link-mode: Full-duplex, Speed: 1000mbps, BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
  Input errors:
    Errors: 12600527, Drops: 0, Framing errors: 12600527, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0,
    Resource errors: 0
  Output errors:
    Carrier transitions: 3, Errors: 0, Drops: 0, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0
    CRC/Align errors                  12600527                0
    FIFO errors                              0                0
    Output packet error count                                 0
    Flow error statistics (Packets dropped due to): 
      Incoming NAT errors:               0
      User authentication errors:        0

Same with ge-13/0/0 output too

Appreciate any help.