Hi,
Ok, so had a strange experince with an SRX tonight!
My SRX100H (12.1X46-D67) has been running fine for a while now.
However tonight the power cut out. I powered the SRX back on and I was unable to pass traffic through the box.
On checking on of the SRX connected hosts, I could see the link was up/up on both sides but there was no traffic reaching the other side i.e no ARP seen or received.
I rebooted the box, no change. But confirmed the boot sequence looked ok via console.
I fully powered down the box, no change again.
The interface stats and output from a 'show interface xx/xx/xx' showed that the interface looked fine.
Then the power went off again (we belive it to be a dodgy kettle!).
But then the SRX powered up and started passing traffic.
From what I can see this is either a hw issue or bug. Can anyone offer any advice, next best action of anything to check for on the box?
Thanks,