Hi guys, on SRX1400 cluster active-standby i just noticed that:
xe-0/0/9 up up
xe-0/0/9.0 up up aenet --> reth2.0
....
....
xe-4/0/9 up up
xe-4/0/9.0 up up aenet --> reth2.0
"monitor inteface xe-0/0/9"
Interface: xe-0/0/9, Enabled, Link is Up
Encapsulation: Ethernet, Speed: 10000mbps
Traffic statistics: Current delta
Input bytes: 47670576353412 (101572664 bps) [0]
Output bytes: 6597886626281 (9502944 bps) [0]
Input packets: 43605948657 (11301 pps) [0]
Output packets: 30379029413 (7657 pps) [0]
"monitor interface xe-4/0/9"
Interface: xe-4/0/9, Enabled, Link is Up
Encapsulation: Ethernet, Speed: 10000mbps
Traffic statistics: Current delta
Input bytes: 6878031830276 (1616 bps) [0]
Output bytes: 1032079131988 (0 bps) [0]
Input packets: 6442898686 (3 pps) [0]
Output packets: 4534846249 (0 pps) [0]
"monitor interface reth2"
Traffic statistics: Current delta
Input bytes: 54549300284954 (109806832 bps) [0]
Output bytes: 7630047597870 (13143192 bps) [0]
Input packets: 50049478486 (12201 pps) [0]
Output packets: 34914021252 (9725 pps) [0]
---------------------------------------------------------------------------------------------------------------------
Can someone explain the difference between input bytes on xe-0/0/9 and reth2?
Thanks in advance.
MM