hi all i had submitted a a help document but could not find it again so i started another
what im trying to do i create ports for different items i have scanned off a diagram of what im attempting to accomplish
i have 2 firewalls one is a srx 300 and the other is srx 220h
i am not good at all with the command line interface that the 2 srx devices use very new to them but this is the only thing that i have left to program
i am using for the primary output on erpro-8 172.16.0.1/19 that is my DHCP and DNS i would like to have all the network devices get address through erpro-8 however i would like the srx firewall to have different zones for security on each one for instance dmz only goes out to configure the dmz but all communication from dmz is blocked to prevent connection into trusted lan dmz has managed switch will have to be accessable from time to time i would like to have help on both the srx firewalls will need NAS switch to be accessable as well and have the DLNA port open for media into both wireless (zone-director) and wired (GSM7242v2)
I know this is asking alot but im desperate i am lost with these and im new to them thatnk you all for the help Matt
