Hi
I am trying to upgrade my SRX 5600 from 12.1X46-D40.2 to 15.X49-d120.3 and I am using the following command
request system software add /var/tmp/junos-srx5000-15.1X49-D120.3-domestic.tgz no-copy no-validate reboot
Installing package '/var/tmp/junos-srx5000-15.1X49-D120.3-domestic.tgz' ...
Verified junos-boot-srx5000-15.1X49-D120.3.tgz signed by PackageProductionRSA_2017 method RSA
Verified junos-srx5000-15.1X49-D120.3-domestic signed by PackageProductionRSA_2017 method RSA
Verified junos-boot-srx5000-15.1X49-D120.3.tgz signed by PackageProductionRSA_2017 method RSA
Verified junos-srx5000-15.1X49-D120.3-domestic signed by PackageProductionRSA_2017 method RSA
Available space: 403374 require: 595368
WARNING: The /cf filesystem is low on free disk space.
WARNING: This package requires 595368k free, but there
WARNING: is only 403374k available.
WARNING: This installation attempt will be aborted.
WARNING: If you wish to force the installation despite these warnings
WARNING: you may use the 'force' option on the command line.
ERROR: junos-15.1X49-D120.3-domestic fails requirements check
Installation failed for package '/var/tmp/junos-srx5000-15.1X49-D120.3-domestic.tgz'
I deleted all the unnecessary files still get only 398M. How do I proceed further
root@Sree-SRX-5600% pwd
/cf
root@Sree-SRX-5600% du -hs *
3.2M boot
2.0K dev
836K etc
0B kernel
0B kernel.old
18K opt
398M packages
16K root
134K sbin
14K usr
40K var
Can I directly upgrade from 12.1x46-d40.2 to the new version or should I do it in phases? Should I also upgrade my firmware. Can I erase the existing OS,reformat the SRX and freshly install 15.x version directly?
show system firmware
Part Type Tag Current Available Status
version version
FPC 3 ROM Monitor 0 0 9.5.1 OK
FPC 5 ROM Monitor 0 0 9.5.1 OK
PIC 0 SPU ROM Monito 0 9.4.2 OK
Routing Engine 0 RE BIOS 0 1.5 OK
Pls help