Hello,
I am at a loss on this one. I have configured via cli and the wizard, and have confirmed configuration many times over. Downloaded Pulse Client directly from SRX device.
Model: srx210he2
JUNOS Software Release [12.1X44-D20.3]
JunOS Pulse client: 4.0.2
I see traffic being allowed via the firewall log, but I do not see any information in the kmd-logs when I enable traceoptions for IPSec and IKE. There is no entries for inactive sessions either. I see the 3 way handshake on wireshark on my local machine which I am trying to connect with. Dst port is 443 and SRC is random port. I know that the Dynamic VPN tunnel should using port 4500. The Pulse client doesnt seem to be getting a IP address, but DHCP is enabled and Proxy ARP enabled on the DHCP interface.
Not sure at this point what to try next. I havent found any links on the web about bugs with my particular JunOS version and SRX model when dealing with Dynamic VPN.
Config attached.
Any sort of assistance or direction would be appreciated.