Routing-Instance and ISIS Routing

Hi all,

SRX1500

I have created two new VRs and also, thanks to Kingsman, enabled ISIS on these VRs with the following command:

set routing-instance Customer-VR protocols isis interface ae2.0

set interface ae2 unit 0 family iso

set interface lo0 unit 0 family iso address 49.0001.xxxx.xxxx.xxxx.00

set protocols isis level 1 authentication-type md5

set protocols isis level 2 authentication-type mds

set protocols isis level 1 authentication-key xxxxxxxx

set protocols isis level 2 authentication-key xxxxxxxx

I have also placed ae2 into the routing-instance

But yet, I cannot get any ISIS routes to show in the routing tables....

I have configured ISIS on the second SRX that has no new defined routing-instance and it works fine.... with dual-stack

Any help would be greatly appreciated.

Thanks