Hello ,
The device is not booting and can cause the following error ?
U-Boot 1.1.6-JNPR-2.1 (Build time: Nov 24 2011 - 05:13:40)
Initializing memory this may take some time...
Measured DDR clock 533.33 MHz
SRX_550 board revision major:1, minor:22, serial #: ACMW7502
OCTEON CN6335-AAP pass 2.2, Core clock: 1300 MHz, DDR clock: 533 MHz (1066 Mhz data rate)
DRAM: 2048 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 8 MB
WARNING: Running from backup u-boot
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM...... done
BIST check passed.
PCIe: Initializing port 1
PCIe: Port 1 link active, 1 lanes, speed gen1
Warning!!!Last reboot reason 0x5 abnormal
Boot Media: usb internal-compact-flash
Net: octeth0
sil3132 command timed out
sil3132 soft reset command failed count=1
sil3132 command timed out
sil3132 soft reset command failed count=2
sil3132 command timed out
sil3132 soft reset command failed count=3
sil3132 command timed out
sil3132 soft reset command failed count=4
sil3132 command timed out
sil3132 soft reset command failed count=5
sil3132 command timed out
sil3132 soft reset command failed count=6